Two vacuum trasnformer oil regeneration system (ZYD-I)
1. Purify oil and remove decay products, discoloration
2. Equipped with anti foam system
3. Low power consumption
4. Regenerate insulating oils in energized or de-energized transformers
Old Transformer oil regeneration system series ZYD-I provides function of degassing, drying, acid and particulate removal
Regenerate insulating oils in energized or de-energized transformers especially for the power, which is over 110KV
Application:
The Oil regeneration system (Series ZYD-I) has been specially designed for on site use to completely regenerate insulating oils in energized or de-energized transformers especially for the power, which is over 110KV. Also it can inject the insulating oil into the transformers on-line. The ZYD-I system provides regular oil purification such as degassing, drying and particulate removal but also can remove acidity, sludge, other soluble oil decay products and discoloration. This is accomplished by the use of high vacuum degasification technology and particulate filters combined with our special brand of earth. After treating, the oil can be reused as new. For special application, the system also can be mounted on a leak proof base and can be installed and operated on a trailer.
Features:
1. Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating particles, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid-alkali water-solubility.
2. Operational can be P. L. C (Programmable Logic Controller).
3. Unique vacuum dehydration, degassifier, regeneration system, adopt stereo-evaporation technology, high efficiently remove water, gas, particles from transformer oil, improve oil quality and dielectric strength.
4. Duplex 3D stereo-evaporation, eliminating the liquid water quickly
5. UK g technology by which the trace water that is show chain, such as dissolved water, can be removed effectively.
6. Instinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power
7. Advanced infrared liquid-level automatic control system to accomplish fully automatic control.
8. Specially applied to vacuum oiling and drying for power transmission equipments.
9. The oil of any grades can be treated either on- or off-load.
10. Special oil pump design with lower noise.
11. Special additives for depolarization, can recover oil color of aged transformer oil to new, equipped with flexible unloading device of short time, good efficiency small quality. Discolor under vacuum can save cost of treatment, the waste impurities doesnt pollute environment (it can be used to architecture and road pave)
Advantages:
Comparing with the single-stage vacuum oil purifier, this machine can dewater, degas and removes the impurities more quickly, more completely, and makes the oil BDV (Breakdown Voltage) of 70Kv or higher. As the bridge-type vacuum linking system that can purify and also can be an independent vacuum power supply, this machine can treat the electric insulation devices.
Oil Regeneration machines, Oil Purification system, Oil Dehydration, Oil Disposal, Oil Filtering, Oil Filtration, Oil Preprocessing, Oil Purification, Oil Purifier, Oil Reclaim, Oil Reclamation, Oil Reconstituted, Oil Recycling, Oil Regeneration, Oil Restoration, Oil Resuming, Oil Separation, Oil Treatment, Oil Filter, Oil Recovery, Oil Recuperation Plant, Equipment & Machinery, Transformer oil purification system, oil drying plant, oil purification plant, drying of oil, oil drying, oil drying device, purification of oil on transformer, transformer oil drying, mobile oil plant, mobile oil purification device, device for drying of oil
| Parameters |
Unit |
ZYD-I-30 |
ZYD-I-50 |
ZYD-I-100 |
ZYD-I-150 |
ZYD-I-200 |
ZYD-I-250 |
ZYD-I-300 |
| Flow rate |
L/h |
1800 |
3000 |
6000 |
9000 |
12000 |
15000 |
18000 |
| Working vacuum |
MPa |
-0.08~-0.099 |
| Working pressure |
MPa |
≤0.3 |
| Temperature range |
C |
20 ~ 80 |
| Power |
|
3 ph 380V 60Hz (Or as needed) |
| Working noise |
dB(A) |
75 |
75 |
75 |
75 |
80 |
80 |
80 |
| Heating power |
kW |
30 |
30 |
45 |
60 |
75 |
90 |
120 |
| Total power |
kW |
35.5 |
37.5 |
52.5 |
71.4 |
86.5 |
102.5 |
135 |
| Oil Inlet/Outlet |
mm |
φ25 |
φ32 |
φ42 |
φ50 |
φ50 |
φ60 |
φ60 |
| Weight |
Kg |
600 |
800 |
1050 |
1400 |
1800 |
2000 |
2200 |
| Overall |
Length |
mm |
1050 |
1100 |
1200 |
1450 |
1600 |
1800 |
1900 |
| Width |
mm |
750 |
800 |
950 |
950 |
1100 |
1200 |
1200 |
| Height |
mm |
1350 |
1400 |
1500 |
1650 |
1800 |
1900 |
1900 |
Insulating Oil Testers
- Fully Automatic Insulating Oil Dielectric Strength Tester IIJ-II
- Fully Automatic Insulating Oil Dielectric Strength Tester DYT
- Fully Automatic Insulating Oil Dielectric Strength Tester DYT-2
- Three Cups Insulating Oil Dielectric Strength Tester IIJ-III
- Six Cups Insulating Oil Dielectric Strength Tester IJJ-VI
- Insulating Oil Dielectric Strength Tester IIJ-603
- Insulating Oil Tan Delta ( Dielectric Loss) Tester DLT0812
- Insulating Oil Dielectric Loss And Resistivity Tester TP-6100A
- Fully Automatic Water-Soluble Acid Value Tester PH-C
- Fully Automatic Surface/Interface Tension Tester IT-800
- Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
- Insulating Oil Gassing Property Tester DPT-20
- Insulating Oil Oxidation Stability Tester TP622
- Multifunctional Shaker SD-01
- Insulating Oil Water Content Tester TP-2100
- Online Insulating Oil Water Content Tester TPEE
- Transformer Oil Dissolved Gas Chromatograph DGA
){kind=link}