| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Transport Package: | International Standard Export Case |
| Trademark: | TOP TESTER |
| Origin: | Chongqing |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
TP-J1-8 laboratory microwave oven is suitable for chemical and biological experiments in universities and research institutes. It is suitable for microwave synthesis, microwave sample dissolution, microwave hydrolysis, microwave catalysis and other fields.
II. Microwave source system : The microwave source system is composed of a magnetron, a high-voltage rectifier, a high-voltage power supply and a high-speed cooling fan. The system uses long-life and high-reliability 2M210 series industrial-grade magnetrons, which are placed in the diagonal direction on the left and right sides of the microwave cavity. Microwaves are introduced into the microwave heating cavity through the feeding port. The special feeding method and specially designed heating cavity ensure the uniform distribution of microwaves. Intelligent electronic control system: The electronic control system consists of two parts: the electrical part and the intelligent control part. The electrical part includes a microwave source, a fan, a sensor and a power supply for the control part. The intelligent control system is the data control and processing center of the entire equipment, which transmits the physical parameters fed back by other systems through sensors to accurately control the normal operation of the vacuum furnace.
III. Over-temperature automatic protection system: The automatic protection system is the guarantee for the safe operation of this product. When the microwave source system causes over-temperature and over-current due to abnormal faults, the microwave source system automatically cuts off the independent microwave source branch power supply. Frame structure: Professional and reasonable structural design provides a reliable platform for the safe and stable operation of the product.
Configuration information: It can hold a standard three-neck flask of 500ml, and is fixed with a standard PTFE plug and base.
The top is equipped with a stirring device, the heating process uses a thermocouple to measure the temperature, and a condenser tube is used for cooling and reflux, and it is equipped with a titration and condensation opening.
The intelligent laboratory microwave oven adopts a microwave oven without a turntable, and the bottom of the microwave oven is a flat ceramic, which is convenient for testing placement of utensils.
Microwaves are irradiated upwards from the bottom through the microwave diverging antenna, and the microwave distribution is more uniform.
Built-in high temperature sterilization system.
Using PLC programming control, temperature and power can be intelligently controlled.
It adopts a stirring motor with adjustable speed, and the speed can be adjusted from 70 to 1400rpm, equipped with an anchor engineering plastic stirrer.
Microwave treatment can be performed on glassware such as 1000ml single-necked flasks and beakers.
Multiple interlocking structure of the door body, the power is cut off when the door is opened, and the operator is protected, and the microwave leakage meets the national standard.
♦ Specification model: TP -J1- 8
♦ 220V/50Hz power supply
♦ Rated microwave frequency: 2450±50MHz
♦ Internal microwave generator voltage: 4200VDC
♦ Single microwave source, maximum output microwave power 800 W
♦ Standard three-necked flasks with a capacity of 500ml ~1000ml are used for microwave treatment.
♦ 0~300ºC armored thermocouple sensor, which can probe into the glassware to measure temperature.
♦ Measure the temperature on the right side of the three-neck flask, and stir in the middle.
♦ The outer dimension is about 500× 420 × 800 (width×depth×height), and the inner dimension is 350 × 320 × 400 mm (width×depth×height). The control part is located at the bottom
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}