PPM,% VOL, mg / m3 automatic Argon Concentration Analyzer (AR-2500)
1. High quality, portable, easy to use
2. Compact and ultra-light
3. Meet IEC
Introduction
Argon concentration analyzer AR-2500 is applicable for argon concentration detection in various industrial environment and special environment. It adopts imported electrochemical sensor and micro-controller technique. It has quick response, high accuracy, good stability and repeatability and leading level performance. Users can custom set up parameters with easy operation. It adopts high-capacity 4000mA NiMH rechargeable battery of extra long standby; 3.5-inch high-resolution industrial color screen which perfectly display technical indexes and gas concentration value; view historical data and curve chart. It owns many functions including printing data.
Feature
1. Adopts the latest ultra-low power consumption semiconductor nano-technology 32-bit microprocessor and 24-bit ADC data acquisition chip; owns the highest level measurement accuracy in this industry.
2. 3.5-inch industrial grade color screen with resolution of 320x480; automatically test the working status of sensor, main chips and its components after power on.
3. Free switch among three concentration units of PPM,% VOL, mg / m3; automatic switch between high and low ranges; max detected concentration of 99.999% VOL.
4. Simultaneously detect 1~6 kinds of gases; freely optional sensors; simultaneously shows concentration of gases and alarm status on the screen.
5. With data storage function; can store 10000 group of data; can directly check historical data and curve graph on the screen.
6. Built-in powerful vacuum pump with pumping distance up to 5m; can work under the negative micropressure environment; reasonable gas chamber design ensures the sensor free from pressure interference.
7. Besides detection of gas concentration, there are optional functions such as temperature / humidity sensor, microprinter, long-distance wireless transmission etc.
8. With functions of overvoltage protection, overcharge protection, short circuit protection, anti-static interference, anti-magnetic interference etc.
Optional two kinds of detection modes of real-time detection and timing detection; timing detection can measure the average value of the gas concentration within 30-3600 seconds.
With automatic recovery function to prevent breakage caused by any external or artificial factors etc.
9. Full software auto-calibration; sensor of up to six grade target point calibration; ensures testing accuracy and has data recovery function.
10. Whole Chinese / English secondary operation menu; total standard 5-direction keys to operate on site; additional 3 independent functional shortcut keys.
11. Full range temperature compensation function; with status indicators for power, pump, alarm, failure etc.
Our oil tester
1. Transformer oil Breakdown voltage Tester (BDV test kit) series IIJ-II
2. Acidity tester model ACD-3000I
3. Karl Fischer Water content Tester Model TP-6A / model TP-2100
4. Fully automatic Interfacial Tension Analyzer model IT-800
5. Gas-Chromatography transformer oil gas analyzer model DGA2013-1
6. Multi-functional Vibration tester model TYD-2000
7. Consolidation Point Determinator model PT-2000
8. Kinematic Viscosity tester model VST-8 /model VST-2000
9. Flash point tester (open cup) model TPO-3000
10. Flash point tester (close cup) model TPC-3000
11. TAN-DELTA TESTER, 10kV Capacitance and Dissipation Factor Test Set model CDEF
12. Automatic Freezing Point & Pour Point Tester model TP-501Z
13. Determination of foaming characteristic of lubricating oil model SD-12579
14. Earth resistance tester model HYDW-II
15. Coil Resistance Tester (TPZC-40)
16. CT/PT tester model TPVA-404
17. Transformer turn ratio tester model HYG-II
18. Relaying Protection Tester model TPJB-III
19. Digital Grounding Resistance Tester model TP2571-II
20. DC High Voltage Generator model ZGF
21. Underground water/gold detector model TP-UWD
Technical parameter
| Detected gas | Argon(Ar) |
| Detection method | pump-sucking; built-in powerful vacuum pump; flow rate: 2 L/min, pumping distance 5-8m; can work under negative micro pressure environment. |
| Detection range | 0-10%VOL |
| Resolution | 0.01%VOL |
| Detection accuracy | ≤±1%(the actual concentration, higher accuracy depends on the sensor) | Linearity error | ≤±1% |
| Response time | ≤10s(T90) | Zero drift | ≤±1%(F.S/year) |
| Recovery time | ≤10s | Repeatability | ≤±1% |
| Explosion-proof mark | ExdII CT6 | Shell material | aluminum+sandblasting oxidation (scratch and corrosion resistant) |
| Protection grade | IP65 | Working temperature | -30~60ºC |
| Power supply | 4000mA rechargeable lithium battery | Working humidity | ≤95%RH; non-condensing |
| Size&Weight | 120*190*190 mm; 2.0 Kg(instrument net weight) | Working pressure | -20Kpa - 100Kpa |
| Standard configuration | Sampling handle×1 pc, 5*8mm hose×1 m, instrument case×1 pc, instruction manual×1 pc, certificate×1 pc |
| Optional configuration | micro printer: external; can be timed; automatic printing of each gas concentration data; portable.
temperature / humidity sensor: direct detection of gas temperature and humidity.
USB data cable×1 pc; data acquisition software×1 set
wireless transmitter: 1000-3000 m transmission distance; optional GPRS transmission for longer distance. |
){kind=link}