Tp-0040 Salt Spray Corrosion Analyzer

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: TP-0040
• Transport Package: International Standard Export Case
• Trademark: TOP TESTER
• Origin: Chongqing
• HS Code: 9031809090
• Production Capacity: 120 Sets/Month

Product Description

Salt Spray Corrosion Analyzer
TP-0040

Applications:

The salt spray corrosion tester is mainly used to test the corrosion resistance of the surface treatment of various materials, including paint, electroplating, inorganic and coated membrane, anodic treatment, anti-rust oil and other anti-corrosion treatments.
 

Features:

1. Digital display controller with full digital circuit design, accurate temperature control, long service life, and complete testing functions;
2. The display interface is dynamic when working, and there is a buzzer alarm to prompt the working status; the instrument adopts ergonomic technology, which is convenient and simple to operate, and is more humanized;
3. With automatic/manual water adding system, the water level can be automatically replenished when the water level is insufficient, and the test will not be interrupted;
4. The temperature controller uses digital display, and the error is ±01. ºC;
5. Double over-temperature protection, warning of insufficient water level, safe to use.
6. The laboratory adopts direct steam heating method, the heating speed is fast and uniform, and the standby time is reduced;
7. Precision glass nozzle disperses through the conical disperse of the spray tower which can adjust the mist, and it will naturally fall on the test card without crystallization salt blocking.
 

Specifications:

1. Power supply: 220V, 50HZ
2. Ambient operating temperature: 5~35ºC
3. Use water quality:
(1). Test liquid preparation - distilled water (pure water) (the HP value should be between 6.5 and 7.2)
(2). The rest of the water - tap water
4. Air pressure setting
(1). Spray pressure--1.0±0.1kgf/cm2
(2). Air compressor regulator filter -- 2.0~2.5kgf/ cm2
5. Installed on the side of the window: it is conducive to drainage and exhaust.
 

Technical Parameters:

1. Dimensions

TP-0040 working chamber dimension: (400*350*300mm); outer size: 880*475*730 mm
TP-0060 working chamber dimension: (600*400*450mm); outer size: 1150*680*900mm
TP-0090 working chamber dimension: (900*500*600mm); outer size: 1420*880*1280mm
 

1. Power Supply: AC 220V

3. Box Material:
a. The test machine box is made of light gray PVC board with a thickness of 5mm.
b. The test chamber cover is sealed with a transparent acrylic impact-resistant plate with a thickness of 5mm.
c. Hidden one-piece reagent supplement bottle, easy to clean and operate.
d. The pressure air barrel adopts a high pressure resistant barrel insulation barrel.
e. The test sample holder adopts a plane indexing type, and the angle can be adjusted arbitrarily. The fog falls evenly on all sides, and the fog is completely consistent.

4. Salt Spray Test;
NSS, ACSS
Laboratory: 35ºC±1ºC.
Pressure air barrel: 47ºC±1ºC.
 

1. Air Supply System: The air pressure is 1Kg/cm², which is adjusted through two stages. The first stage is roughly adjusted to 2Kg/cm² by an imported air filter with drainage function. The second stage is precisively adjusted to 1Kg/cm², with a 1/4 pressure gauge.

 

1. Spray Method:

a. Bernoult's principle absorbs salt water and then atomizes it. The degree of atomization is uniform, and there is no phenomenon of blocking crystallization, which can ensure continuous testing.
b. The nozzle is made of toughened glass, which can adjust the spray volume and spray angle.
c. The spray volume is adjustable from 1 to 2ml/h (the standard of ml/80cm²/h requires testing for 16 hours to find the
average volume). The measuring cylinder adopts the built-in installation, the appearance is beautiful and tidy, the operation
and observation are convenient, and the installation space of the instrument is reduced.
 

1. Heating System: Direct heating method is adopted, the heating speed is fast and the standby time is reduced, when the temperature reaches, it will automatically switch to the constant temperature state, the temperature is accurate, and the power consumption is small. Pure titanium heating tube, acid and alkali corrosion resistance, long service life.

8. Control System:
The laboratory heating tank adopts a liquid expansion safety temperature controller. Two kinds of water adding systems, automatic and manual, are adopted to automatically or manually replenish the water level of the pressure barrel and the laboratory to prevent damage to the instrument due to water shortage and ultra-high temperature.

9. Demisting System: clear the salt mist in the test chamber when the machine is shut down, and prevent the corrosive gas from flowing out and damaging other precision instruments in the test room.

10. Safety Protection Device:
a. When the water level is low, the power supply will be cut off automatically, and the safety warning light device will display dynamically.
b. When the temperature is over, the power supply of the heater will be cut off automatically, and the safety warning light device will display dynamically.
c. When the water level of reagent (salt water) is low, the safety warning light device will display dynamically.
e. Leakage protection function to prevent personal injury and instrument failure caused by line leakage or short circuit. The

11. Standard Installation Equipment:
a. V-shaped/O-shaped storage rack 1 set
b. Graduated cylinder 1 no.
c. Temperature indicator needles 2 nos.
d. Collector 1 no.
e. Glass nozzle 1 no.
f. Humidity cup 1 no.
g. Glass filter 1 no.
h. Spray tower 1 set
j. Demisting system 1 set
k. Bottles of reagent sodium chloride (500 g/bottle) 2 bottles
m. Plastic anti-rust bucket (5ml measuring cup) 1 no.
n. Nozzle 1 no.