ZYD-I-30 China Supplier Waste Oil Regeneration Machine
Product Application:
Specially designed for used transformer oil purifier, this ZYD series is widely used in transformer oil dehydration, degasification as well as remove particulate matters. The oil's dielectric strength can be maintained well during the whole purifying process.
Product Features:
1. Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating particles, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid-alkali water-solubility.
2. For special application, the operation can be controlled by P.L.C (Programmable Logic Controller).
3. Unique vacuum dehydration, degassifier, regeneration system, adopt stereoevaporation technology, high efficiently remove water, gas, particles from transformer oil, improve oil quality and dielectric strength.
4. Duplex 3D stereo-evaporation, eliminating the liquid water quickly
5. UK g technology by which the trace water that is show chain, such as dissolved water, can be removed effectively.
6. Instinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power
7. Advanced infrared liquidlevel automatic control system to accomplish fully automatic control.
8. Specially applied to vacuum oiling and drying for power transmission equipments.
9. The oil of any grades can be treated either on- or off-load.
10. Special oil pump design with lower noise.
11. Special additives for depolarization, can recover oil color of aged transformer oil to new, equipped with flexible unloading device of short time, good efficiency small quality. Discolor under vacuum can save cost of treatment, the waste impurities doesn't pollute environment (it can be used to architecture and road pave)
| Technical Parameter |
| Item |
Unit |
ZYD-I-30 |
ZYD-I-50 |
ZYD-I-100 |
ZYD-I-150 |
ZYD-I-200 |
ZYD-I-250 |
ZYD-I-300 |
| Flow rate |
L/h |
1800 |
3000 |
6000 |
9000 |
12000 |
15000 |
18000 |
| Working vacuum |
MPa |
-0.08~-0.099 |
| Working pressure |
MPa |
≤0.3 |
| Temperature range |
°C |
20 ~ 80 |
| Power |
|
3 ph 380V 60Hz (Or as needed) |
| Working noise |
dB(A) |
75 |
75 |
75 |
75 |
80 |
80 |
80 |
| Heating power |
kW |
30 |
30 |
45 |
60 |
75 |
90 |
120 |
| Total power |
kW |
35.5 |
37.5 |
52.5 |
71.4 |
86.5 |
102.5 |
135 |
| Oil Inlet/Outlet |
mm |
φ25 |
φ32 |
φ42 |
φ50 |
φ50 |
φ60 |
φ60 |
| Weight |
Kg |
600 |
800 |
1050 |
1400 |
1800 |
2000 |
2200 |
| |
mm |
1050 |
1100 |
1200 |
1450 |
1600 |
1800 |
1900 |
| Overall |
mm |
750 |
800 |
950 |
950 |
1100 |
1200 |
1200 |
| |
mm |
1350 |
1400 |
1500 |
1650 |
1800 |
1900 |
1900 |
Guarantee Value:
| Item |
Unit |
After treatment |
| Breakdown Voltage |
kV |
≥75 |
| Moisture content |
PPM |
≤3 |
| Gas content |
% |
≤0.1 |
| Impurity size |
micron |
≤0.5 (no free carbon) |
| IFT |
dynes/cm |
≥40 |
| Acid value |
mg KOH/g |
≤ 0.03 |
| Dielectric loss factors |
tgδ(90°C) |
≤0.001 |
| Colour |
L |
≤0.5 |
Our Company
Chongqing TOP Oil Purifier Manufacture Co., Ltd is a professional leading manufacturer of oil purifiers and oil testers. We takes the mission of existing on the basis of excellent quality as well as developing technical innovation,and introduces advanced technology.
TOP Oil Purifiers are widespread in the fields of electric power, petrifaction, mineral, shipbuilding, steel construction, bridge, automobile and railway, playing a great role in reducing energy consumption for clients as well as environmental pollution. We provides you with reliable oil purifiers such as transformer oil purifier, turbine oil purification machine, hydraulic oil purifier, lubricating oil filtration machine, fuel oil restoration, oil and water separator, oil regeneration equipment, waste oil recycling equipment etc.
TOP Testers works on the development, production, market, technical and after-sale service for petrochemical analyzers, transformer substation electrical testing equipment and circuit detecting equipment. Main products are water content testers, surface/interfacial tension testers, flash point testers, kinematic viscosity testers, oil acidity testers, insulation oil dielectric strength testers, transformer characteristics testers, relay protection testers, high voltage testing equipment etc.
Pre-sale Service
1)Will give response within 24 hours for all inquiries and questions about our products.
2)Recommend the most suitable machine according customer's demands.
3)Professional pre-sale model/configuration selection advise and technical support -- offered by experienced technician.
4)Free on-site installation, debugging and technical training -- offered by strictly trained technology application engineers.
5)Offer OEM service.
After-sale Service
1)The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.
2)We guarantee the maintenance time no more than 3 working days and response time within 1 hour.
3)We build instrument service profile for our clients to record the product service and maintenance conditions.
4)After instruments start service, we will pay follow-ups to collect the service conditions.
Packing and Delivery
Safety and Timely Transportation
1)Standard export wooden case with high quality cushioning material ensure the item arrive customer in good condition.
2)Carefully check every packing detail before delivery to avoid any troubles during the transportation.
3)Appointed logistics company could be used according to customers demands.
4)Do our best to make sure customer can get their goods in time.
Contact Us
If you are interested in this product, please don't hesitate to contact with me. I will give response within 24 hours. Kindly add my WhatsApp for instant communication.Whatsapp: +86 155 2351 8178
){kind=link}