Used Waste Turbine Oil Cleaning Gear Oil Filter Machine

• Customization: Available
• Certification: ISO9001, CE
• Application: Turbine Oil, Lubricant Oil
• Model NO.: TY
• Voltage: 380V
• Folw Rate: 150 L/min
• Structure: Mobile
• Mechanical Principle: Vacuum
• Type: Suction Filter
• Color: Yellow, Blue, Green
• Transport Package: Wooden Case
• Specification: CE; ISO
• Trademark: TOP
• Origin: Chongqing, China
• HS Code: 8421299090
• Production Capacity: 100 Sets/Month

Product Description

Used waste turbine oil cleaning gear oil filter machine

 

Turbine Oil Condition

Turbine oil is used as lubricant for the spindles of the host and auxiliary in various steam turbines, e.g.: steam turbine, water turbine, gas turbine etc. With the temperature and pressure of the steam from turbine are increasing, and escalation of capacity, the oil temperature is higher and higher, and thus lead to more demanding requirements of turbine. In addition to requirements of good oxidation stability and anti-corrosion, but should also have the requirements of anti-foam, anti-emulsification, extreme pressure and air release. In particular, more than 20 years, the power system 30MV and more large generating units increased year by year, the speed governing and the hydraulic system operating pressures could up to 4MPa.

The quality of turbine oil would directly affect the operation of the turboset, so there are five requirements to turbine oil as follows:

1. Excellent stability of anti-oxidation:  Because the turbine oil is repeatedly recycling used (6-10 times per hour) for a long time (generally 5~15 years), meanwhile it always stays at a high temperature condition (about 60ºC) and contacts with air and metal, so the turbine oil is asked for good stability of anti-oxidation, that is creating little sediments and acid during long term operation.
2. Excellent property of viscosity temperature and proper viscosity: proper viscosity of turbine oil is an important factor for ensure normal lubrication of the whole unit. Excellent viscosity temperature of turbine oil could ensure good lubrication no matter what temperature the turbine bearings would be at.
3. Excellent property of demulsification: the condensate water may be leaked into the oil system from the loose seals and make the oil emulsified, which prevent the units from operating safely. Therefore the turbine oil must be requested for excellent property of demusification, that is the water could be separated and discharged quickly.
4. Excellent property of anti-rusting and corrosion protection: the steam and condensate water will leak into the oil recycling system, make the oil emulsified and corroded, what more serious is it would cause some bad effects such as governing system down, units shaking, over abrading. So the good turbine oil must be requested for excellent property of anti-rusting and corrosion protection.
5. Excellent property of anti foaming:During operation, the air would be leaked into the oil and caused foam that will lead to abnormal problem of oil during recycling. Thus the turbine oil must have the good property of anti foaming.

The Deterioration of Turbine

During operation, the turbine oil would be mixed with condensate water that leaks from worn-out seals or other parts, and the particles from all the worn-out parts or pipes. Therefore the turbine oil will lost its own lubricant function and increase the friction and damage of the components, meanwhile the water and metal impurities contains in the oil would speed up the oxidizing reaction of the turbine oil. So it's important and necessary to purify the deteriorated turbine oil in time.



Application

Our TY Series turbine oil purifier is applied for on-line turbine oil filtration in electric power, metallurgical, chemical engineering industries. It is good at emulsion breaking, dehydration and removing moisturem gasm impurities, soap, gelatin, acid, pigment and metal particulates in emulsified turbine oil and low-viscosity lubricating oil as well as turbine oil used in other machinery and electric power equipment, and improve the oil quality to ensure a normal work of the generator sets adjustment and lubrication system.

Feature

1. it is strong ability of dehydration and breaking emulsion, that is easy to separate the great moisture and tiny moisture out of the used oil. Because of the special break emulsion device (water separator), the emulsified oil could be treat and become transparent.
2. It is strong ability of removing impurities, that is the big area and deep-seated accurate filtration material can eliminate the tiny particles from used oil that could replace oil system clean device, make great polluted oil system recovered and meet "the operating turbine oil pollution control standard".
3. It is strong ability of automatic, safe and reliable operation. This model is used float ball level automatic control device that realizes auto working completely without manual labour, leads to a simple and stable operation.
4. Thus, TY series is specially fit for applying to filter turbine oil, hydraulic oil and the low viscosity oil that contains lots of water or tiny particles which need to be precisely processed.
1.It adopts the coalescence and separation technique and 3D-Evaporation technical and thin film evaporation technique, and it has strong ability to break emulsion and remove water from the oil.
2. Optimized electric heating system with automatic constant temperature controller ensures the oil temperature to be even and stable.
3. Precise multi-stage filtration system helps remove different kinds of impurities with high quality filter element of better ability of containing pollutants and long service life.
4. Advanced infrared oil level control system and pressure protection device make operation simple and safe.
5. It can purify any kinds of turbine oil used in steam turbine and water turbine online and onsite.
6. Air cooling system helps cool down air and gases from the flash distillation column so as to extend the service life of vacuum pump, avoiding the inconvenience of water cooling.
7. The machine can also be installed with digital flow meter and timer to calculate and record the volume of output oil and working hours (it's optional).
8. Aluminum electric control cabinet has the merits of heat conducting and anti-explosion
9. Adopts interlocked protective system, which connected oil pump, heater, and oil level sensor, avoiding blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.
10. High quality and low noise oil pump
11. Hi-automatization operation, convenience, reliable, and safety


Special features

1. The plant is delivered ready for operation.
2. Continuously clean the oil
3. On-line water content measuring device (optional)
4. All oil treatment plants, type TY are equipped with an automatic Anti-Foam Control System.
5. The plant is equipped with built-in control and safety devices, which provides for a maximum operating security.
6. Minimised power consumption through optimised degassing (excellent efficiency factor).
7. Standardized filter housing for 1 micron , 5 micron, 20 micron and 80 micron filter cartridges.
8. Automatic supervision of the degree of contamination of the fine filter cartridges
9. All parts of the machine are stainless steel and food grade material
10. All plants are PLC controlled (optional)

To meet customers' special needs, we develops 
TY semi-automatic turbine oil purifier,
TY-A automatic turbine oil purifier with PLC
TY-Ex  Ex anti-explosion turbine oil purifier for different requirements and working conditions.
TY-W Enclosed type turbine oil purifier which can prevent rain, sun, dust
TY-M Mobile outdoor type turbine oil purifier which can move and operate on-site

Working Principal

While the oil purifier is working, the oil will flows into the heater by the pressure of inner and external. After heating, the oil goes into the 1st-stage filter to remove big particles and then reaches 2nd-stage filter (that is water separator) which adopts strengthen hydrophilic oleophobic technique to change the mutual acting force from oil and water surface, make the tiny water droplets in oil move fast and coalesce into big water droplets that would be separated out and subsided in the water storage tank. Meanwhile the oil enters into the vacuum tank and pass by sprinkler which make the oil sprayed and formed big aerating area and long aerating time, that could finally separate gas from oil. The mixed gas that contains steamed water and gas will go across the condenser and form liquid, which would be discharged by vacuum pump. The oil whose water was removed will be pumped into 3ird-stage filter to eliminate tiny impurities and precisely purified by fine filter, finally get clean oil out.

Technical Parameter

Table 1 Vacuum Oil Purifier Technology Standard

Parameter		Unit	TY-10	TY-20	TY-30	TY-50	TY-100	TY-200	TY-300
Flow rate		L/min	10	20	30	50	100	200	300
Vacuum degree		Mpa	-0.06~-0.095
Working pressure		Mpa	≤0.5
Working temperature		ºC	≤40~60 (no more than 55ºC for purifying turbine oil.)
Power Supply		V/Hz	380/50/3P (Customized)
Heating power		kW	15	18	24	30	60	81	90
Total power		kW	17	20	26	32	64	86	100
Inlet (outlet) dimension		mm	Φ32	Φ32	Φ32	Φ42	Φ42	Φ60	Φ76
Weight		kg	400	480	600	700	800	1100	1350
Overall dimension	L	mm	1300	1300	1400	1400	1500	1850	2100
	W	mm	1000	1050	1100	1150	1100	1300	1400
	H	mm	1600	1700	1800	1850	1850	1900	2000

Table 2 After treated by machine
 

Item	Guarantee indexes
Moisture content	≤50 PPM
Demulsification value	New oil≤15min,running oil≤30min
Impurity size	≤1 micron
Gas content	≤0.1%
Clean degree	≤4 Grade (NAS1638)