Industrial waste mineral engine oil purification system (TYA-50)
1. Remove solid particles, deteriorated oxide, air, gas, moisture etc
2. Improve oil performance, restore flash point
3. Best after sales service
Engine oil introduction:
Basic function of engine oil: Antifriction, lustration, cooling, seal and anticorrosion
Performance of engine oil:
1. Fine oxidation stability, not easy to form paint film and carbon.
2. Fine lustration dispersing.
3. Good viscosity-temperature performance, high viscosity.
4. Good corrosion resistance, abrasion resistance and anti-pubescence.
5. Good low temperature resistance.
The engine oil mixed with water or cooling fluid, fuel, soot, carbon pledge, dust and over wear to produce metal particles and insoluble and soluble oxides that result from oxidation are easy to be aging and deteriorated. Using aging and deteriorated oil will make piston ring felt, oil way blocked, corrosion and sediments added to aggravate abrasion. So the engine oil must be filtered in time to recover the oil's property, save money and oil resource.
Application:
TYA series oil purifier is used to purify the waste engine oil and all other lubricating oil, it can be efficient for removing the abrasive dust, foundry sand, impurities, moisture, organic acid and inorganic acid from the waste engine oil, and remove carbon particles, deteriorated oxide etcparticulates from waste engine oil, and also remove gelatins and asphalt from the oil. It can break the emulsion and improve the color of the oil, make the purified oil's color approximate to the new oil, recover the oil's property and improve the engine oil's operation performance, reduce the abrasiveness, to assure the engine oil lubricating system operate normally, prolong the service life of the gas engine and the oil. It can save the cost of oil and save the fuel resource. It can be widely used in oil field, mine, metallurgy, electric power, traffic, manufacturing to filter hydraulic oil, machinery oil, cooling oil and engine oil which is used in vessel and automobile for oil regeneration purification treatment.
Characteristics:
1. Strong ability of filterating impurities. Refered to the characteristics of the waste engine oil: Heavy particle sand, much impurities, badly dirty oil, it combines magnetic filteration with densification filtration step by step.
2. It choose continuously treatment idea, and this will enhance the efficiency and save producing cost a lot.
3. It can remove the water and other harmful air in the oil.
4. Adopted step air-cooling and waste air filtration to deal with the mixed air which is pumped. Increased the equipment's effectvie output, prolonged the life-span of the vacuum pump. It is not only protecting the vacuum pump, but also protecting the environment.
5. The system has the advantages of pressure mechanical filtration, vacuum filtration, centrifugal filtration. It is not only overcome the disadvantage of plate oil purifier, but also can reduce the acid, degassing and breaking emulsion that normal vacuum oil purifier and centrifugal oil filtraion can not do.
6. Adopted advanced fuzzy oil tempurature device, set upper and lower limits of the oil temperature discretionarily. It makes the oil temperature control come true at the section to avoid heating alternating contactor working frequently, prolongs the service life of the contactor.
Oil purifier, oil filtration, oil purification, oil filter, oil treatment, oil saving, oil recycling, oil processing, oil filtering, energy saving, oil regeneration, oil processor, oil filter, oil process, oil purify, oil regenerating, , waste oil management, oil regenerate, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil recycle, oil reclamation, oil refinery, oil separator, oil separation, oil purifiers, oil recondition, oil dehydration, machine recycling used oils, waste oil filter, oil degasifier, waste engine purifier,
Parameter:
| Item |
Unit |
TYA-10 |
TYA -20 |
TYA -30 |
TYA -50 |
TYA -100 |
TYA -150 |
TYA -200 |
TYA -300 |
| Flow rate |
L/min |
10 |
20 |
30 |
50 |
100 |
150 |
200 |
300 |
| Working vacuum |
Mpa |
-0.06 ~- 0.095 |
| Working pressure |
Mpa |
≤0.4 |
| Temperature |
ºC |
0~100 |
| Power supply |
|
380V/50HZ/3Ph 5 wire(as customer's requirement) |
| Working noise |
dB(A) |
≤65~80 |
| Working time |
H |
≥ 4000 |
| Continuous working time |
H |
≥150 |
| Working noise |
dB(A) |
≤75 |
≤75 |
≤75 |
≤78 |
≤78 |
≤78 |
≤80 |
≤82 |
| Electric heating power |
kW |
36 |
40 |
45 |
72 |
80 |
90 |
120 |
135 |
| Total electric power |
kW |
38 |
42 |
47 |
75 |
87 |
101 |
135 |
147 |
| Outlet(inlet) caliber |
mm |
Ф25 |
Ф25 |
Ф25 |
Ф32 |
Ф42 |
Ф50 |
Ф50 |
Ф60 |
| Weight |
kg |
350 |
380 |
400 |
450 |
550 |
650 |
700 |
750 |
| Size |
L |
mm |
1500 |
1500 |
1500 |
1600 |
1750 |
1900 |
1950 |
2100 |
| W |
mm |
1000 |
1050 |
1050 |
1150 |
1150 |
1600 |
1600 |
1600 |
| H |
mm |
1600 |
1600 |
1650 |
1700 |
1750 |
1950 |
1950 |
2000 |
| Index after filtering |
Moisture content |
PPM |
≤50 |
| Gas content |
% |
0.1 |
| Impurity size |
μm |
≤1(Customerizable) |
| Demulsification value |
|
(fresh oil)≤15min, (oil in operation)≤30mi |
| |
Cleanness degree |
Degree |
≤4(NAS 1638) |
Lubricating Oil Purifier
TYA Lubricating Oil Purifier Machine
TYA -A Fully Automatic Lubricating Oil Purifier
TYA -W Enclosed Lubricating Oil Purifying Unit
TYA -Ex Explosion-Proof Hydraulic Oil Cleaning Machine
TYD High Water Content Hydraulic Oil Water Separator
Recommended Petroleum Products General Testers
- Fully Automatic Karl Fischer Water Content Tester TP-2100Digital Karl Fischer Water Content Tester TP-6AKinematic Viscosity Tester VST-2000Kinematic Viscosity Tester TPV-8Kinematic Viscosity Tester VST-3000Fully Automatic Oil Acidity Tester (6 cups) ACD-3000IFully Automatic Surface/Interface Tension Tester IT-800Automatic Surface/Interface Tension Tester (Platinum Plate Method) IT-800PFully Automatic Open Cup Flash Point Tester TPO-3000Fully Automatic Closed Cup Flash Point Tester TPC-3000Digital Open Cup Flash Point Tester TPO-100Digital Closed Cup Flash Point Tester TPC-100Cloud Point & Pour Point Tester PT-2000Multi-functional Vibration Tester VBT-2000Automatic Potentiometric Titrator TP668Petroleum Products Density Tester DST-3000Petroleum Products Density Tester TP-109AKarl Fischer Volumetric Water Content Titrator TPDDistillation Range Tester DIL-201Online Oil Quality Tester PTT-002Liquid Phase Corrosion Tester TPS-05Copper Corrosion Tester TP-113Petroleum And Synthetic Liquid Anti-Emulsification Tester TP-122Dew Point Tester DPME-PPortable Chilled Mirror Dew Point Tester TP-1500
){kind=link}