Karl Fischer Moisture Transformer Oil Lube Oil Content Testing Kits (TP-6A)
Application:
The tester adopts the global recognized classical moisture testing method- Karl Fischer Coulometric Method. This method is the most concentrated and accurate method, with advantages of high accuracy and low cost. As a universal standard and analyzing method, it can quickly analyze the moisture content in liquid, solid and gas and directly display testing results, with testing range from 0.0001%(1ppm) to 100%. Therefore, this testing method has been widely used in institutions and enterprises of petroleum, chemical industry, power, pharmaceuticals, pesticide, railways, research, etc.
Whole testing process is automatically controlled by the tester itself, during which auto-stirring and analyzing would be finished within 60seconds, and results would be displayed directly. Totally closed titration system avoids damage to operator from reagent. Equipped with 500ml Karl Fischer Reagent, which could test about 1000 times sample continuously, completely avoiding big deviations of other moisture testing method and thus improving quality index of products.
Application Area:
Liquid Chemical Industry: Alcohols, ethers, esters, alkenes, benzenes, amines, organic solvents, phenols and other organic products applicable to Karl Fischer Method for determination
Petroleum and Power Industry: Insulation Oil, Transformer Oil, Turbine Oil, etc.
Pharmaceutical Industry: Medicine materials
Pesticide Field: Emulsifier
Other Industry: Electrolyte of lithium battery
Solid Various mineral salt, citric acid, explosives, paraffin and other solids with good solubility
Gas Natural gas, liquefied gas, Freon, butadiene, chloromethane, etc.
Features
1. Adopts advanced MPU auto-control system, direct A/D conversion of testing electrode data
2. Completely closed titration system avoids direct touch between people and agent as well as influence of environmental humidity.
3. Auto-control and compensation of electrical current via MCU contributes to quick balance of reagent.
4. Highlighted six-digit Nixie tube display, with long service lifetime, high luminance and 0.1 microgram' sensitivity.
5. Stirring speed is adjustable and steerable via buttons; Breakdown can be self-checked via buttons.
6. Electrolysis and testing indicator lights indicates testing status.
7.400mA electrolysis current is automatically controlled, which greatly improves sensitivity and accuracy.
8. Advantages of sample auto-testing and direct display of results.
Application area:
| Liquid |
Chemical Industry:alcohols, ethers, esters, alkenes, benzenes, amines, organic solvents,phenols and other organic products applicable to Karl Fischer Method for determination
Petroleum and Power Industry:Insulation Oil, Transformer Oil, Turbine Oil, etc.
Pharmaceutical Industry :medicine materials
Pesticide Field:emulsifier
Other Industry:electrolyte of lithium battery |
| Solid |
Various mineral salt, citric acid, explosives, paraffin and other solids with good solubility |
| Gas |
Natural gas, liquefied gas, Freon, butadiene, chloromethane, etc. |
Our Others Testing Equipments
1.Fully Automatic Karl Fischer Water Content Tester TP-2100
2.Kinematic Viscosity Tester VST-2000
3. Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
4. Fully Automatic Surface/Interface Tension Tester IT-800
5. Fully Automatic Open Cup Flash Point Tester TPO-3000
6.Fully Automatic Closed Cup Flash Point Tester TPC-3000
7.Cloud Point & Pour Point Tester PT-2000
8.Multi-functional Vibration Tester VBT-2000
9.Petroleum Products Density Tester DST-3000
10.Distillation Range Tester DIL-201
11.Liquid Phase Corrosion Tester TPS-05
12.Copper Corrosion Tester TP-113
13.Petroleum And Synthetic Liquid Anti-Emulsification Tester TP-122
14.Dew Point Tester DPME-P
15.Vehicle Gear Oil Channel Point Tester Model TP-0030
16.Anti-Corrosive Oil/Grease Salt Spray Corrosion Tester Model TP-0081
17. Mechanical Impurities Tester Model PC-511
18. Air Release Value Tester Model TP-0308
19.Distillate Fuel Oil Oxidation Stability Tester Model TP-175
20. Foam Characteristics Tester Model FC-892
21.Dark Petroleum Products Sulfur Content Tester Model TPC-120
22. Petroleum Products Aniline Point Tester Model TP-262A
23.Petroleum Products Ash Tester Model TP-508
24.Petroleum Products Chroma Tester Model TP-225
25. Automatic Petroleum Products Carbon Residue Tester (Micromethod) CS-0625
26.Spontaneous Ignition Point Tester FP-706
27.Fully Automatic Glassware Washing Machine TP504
28. Lube Oil/Grease Evaporation Loss Tester EL-7325
29. Crude Oil And Fuel Oil Sediment Tester TP-130
30. Wide Temperature Range Lubricating Grease Drop Point Tester TLS-22
31. Crude Oil And Petroleum Products Salt Content Tester SCA-068
32. Petroleum Products Saturated Vapor Pressure Tester(Reid Method) TP-8017
33.Petroleum Products Freezing Point Tester TP-2430
34. Oxygen Bomb Calorimeter TP-1B
35. Existent Gum Tester TP-509A
36.Octane and Hexadecane Value Tester TP-131
37.Automatic Gasoline Oxidation Stability Tester TP-148
38. Light Petroleum Products Sulfur Content Tester (Lamp-Kindled Method) TP-119
39. Resistant oil Chlorine Content Tester TP388
40. Distillate Fuel Mercaptan Sulfur Tester TP-624
| Method of displa: |
Highlighted six-digit Nixie tube display |
| Method of Testing: |
Karl Fischer Coulometry Method |
| Testing Range: |
1ugH2O_100mgH2O |
| Moisture Content Range: |
0.0001%(1ppm)_100% |
| Senstivity: |
0.1ugH2O |
| End-point Indication: |
Voice Warning/end-point light indication |
| Accuracy: |
3ugH20-1mgH2O, deviation: ≤0.3% of indications
More than 1mgH2O, deviation: ≤0.5% of indications(exclude deviation of sample injection) |
| Electrolysis Current: |
Auto-control within 400mA |
| Self-checking: |
Breakdown self-checking button |
| Drift Compensation: |
Auto-control via MPU |
| Stirring Speed: |
Steerable |
| Dimension: |
350×250×160mm |
| Working Environment: |
Temperature: 5-40 C |
| Power Consumption: |
<40W |
| Power Supply: |
AC220V±10% 50HZ±2.5HZ |
| Weight: |
About 6kg |
){kind=link}