1. Independent research and development of GC system with electronic flow and pressure control (EFC, EPC)
2. Independent research and development and efficient filament, electron emission efficiency is high, the largest up to 350 mu 3. Single quadrupole mass with pre quadrupole analyzer, effectively reduce the sample measurement process of quadrupole pollution; 4. With high energy conversion with electron multiplier provides excellent sensitivity; 5. Import of mechanical pump and molecular pump excellent vacuum system, ensure the high stability and reliability of the system; 6. Equipped with a full range of vacuum gauge, real-time monitoring vacuum conditions; 7. Perfect protection system to ensure that the instrument is abnormal condition of protection system of key parts, prolong the service life of the instrument; 8. The advanced RF power digital compensation technology, can make all the quality within the scope of the mass spectrum peak to achieve high sensitivity and resolution
Technical Parameters:
Injection port temperature:450 ºC, any temperature controlled
Pressure control range: 0-100 psi, the control precision of 0.002 psi
Pressure control mode: the electronic pressure control, support constant voltage and constant current
Bypass mode: distributary and not split injection port, the largest tap - 1000:1
Column temperature box operating temperature: room temperature + 4 ºC ~ 450 ºC
The oven heating rate: 120 ºC / min (oven)
Temperature programmed heating platform: order 7 8 platform
Automatic sampler: matching
MS technical indicators
Ionization energy (EI) : 5 eV - 250 eV (adjustable)
Quality range: 1.5-1000 amu
Resolution: unit mass resolution
Ion source temperature: 100-350 ºC
Filament emission current: 0-350 ua
Temperament interface temperature: 450 ºC
Quality shaft stability: + / - 0.10 amu / 48 HRS
Sensitivity: full scan, 1 pg eight fluorinated naphthalene (OFN) in the m/z 272 amu,
Signal to noise ratio (S/N) or greater spake (RMS)