 |
FOCUS ON OIL FILTRATION SYSTEM OVER 20 YEARS
Recycling your used oil reduces pollution and protecting our environment.
Conserving a valuable resource and getting paid for it.
Chongqing TOP Oil Purifier Co.,Ltd. |
Product Description
Product Show:
ASTM D92 and GB/T 3536-2008 Fully Automatic Flash Point Analyzer (Open-Cup)
Application:
This instrument is designed and manufactured in accordance with the requirements stipulated in GB/T 3536-2008 Standard of the People's Republic of China "Determination of Flash Point and Flame Point of Petroleum Products Cleveland Open Cup Method" and ASTM D92. It is suitable for the determination of Flash Point of Petroleum Products whose Flash Point of Open Cup is higher than 79ºC except fuel oil by the method prescribed in this standard.
Features:
1. Control mode: Microcomputer control, automatic correction of system deviation, automatic correction of atmospheric pressure, and calculation of correction value.
2. Automation: automatic lifting, automatic sweeping and automatic detection.
3. The experimental procedures: according to the standard, heating rate automatically controlled, testing accurately, accurate, adopting new heating material, safe and reliable, and long service life
4. The experimental data are saved automatically and the instrument has the function of fault self-diagnosis.
5. High-precision ionization ring detection mode, automatic stopping while over heating.
Technical Parameters:
1. Temperature Measurement Range: Room Temperature to 400ºC
2. Accuracy: 0.1ºC
3. Resolution: 0.1ºC
4. Heating rate: At the beginning of heating, the heating rate of the sample ranges from 4(ºC/min)~17(ºC/min) .When the sample reaches the last 23ºC±5ºC before the expected flash point,the heating rate ranges from 5(ºC/min)~6(ºC/min).
5. Test ignition source: natural gas, liquefied petroleum gas or butane gas/electronic ignition.
6. Ignition test cycle: 23ºC±5ºC before reaching the expected flash point, it will sweep once when the temperature increase very 2ºC.
7. Flash point value: If the difference between the observed flash point and the initial ignition temperature is less than 18ºC, then the result is invalid. In this condition,new specimens should be replaced and re-determined, and the initial ignition temperature should be adjusted until the effective results are achieved. That means the flash point value should be higher than the initial ignition temperature by more than 18ºC.
8. Repeatability of measurements: Repeatability ≤4ºC
9. Operating environment: (ambient temperature) 5~50ºC. (Relative humidity) less than 80% RH
10. Power supply: AC230V±10%,50±1Hz
11. Power: 500W
Parts Included:
| No. |
Description |
Qty |
| 1 |
Spectrometer |
1 |
| 2 |
Power Supply |
1 |
| 3 |
Dust Cover |
1 |
| 4 |
USB Cable |
1 |
| 5 |
Power Cord |
1 |
| 6 |
Screw Driver, 150x6mm |
1 |
| 7 |
Allen Wrench, 2.5mm |
1 |
| 8 |
Replacement Desiccant |
1 |
| 9 |
Polystyrene Film |
1 |
| 10 |
Software CD |
1 |
| 11 |
User Manual |
1 copy |
Certificate:
Payment Terms:
| MOQ |
1 Set |
| Trade Terms |
EXW, FOB, CIF, CFR |
| Payment Terms |
T/T, L/C |
| Port of Loading |
Any Port of China |
| Packing Method |
Internaional Standard Wooden Case |
| Transportation Method |
By Sea, By Land, By Air, By Express |
| Supply Capability |
100 Sets/Month |
After-sale Service:
* The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.
* We guarantee the maintenance time no more than 3 working days and response time within 1 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.
Company Profile
Our Company:
Chongqing TOP Oil Purifier Co., Ltd
Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Chongqing TOP is a professional leading manufacturer and supplier of oil purifiers and various related testers. Our company consists of departments respectively for technological development, machinery manufacture, instrument manufacture and quality control etc.
Exhibition:
Our Factory:
WELCOME YOUR INQUIRY
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}