Dga2013-1 Multi-Functional Laboratory Transformer Oil Dissolved Gas Chromatograph Tester

• Customization: Available
• Transport Package: Standard Wooden Case
• Trademark: TOP OIL TESTER
• Model NO.: DGA2013-1
• Origin: Chongqing
• HS Code: 84212990

Product Description

 DGA2013-1 Multi-functional Laboratory Transformer Oil Dissolved Gas Chromatograph Tester

 

Input voltage range	-2.5V ~ + 2.5V
Integral sensitivity	0.05uV • s
Minimum resolution	1uV
Sampling frequency	maximum 50 times / sec, program variable adjustable.

1.1Temperature control

Temperature range

Column chamber: room temperature+15ºC-399ºC

Vaporizing chamber: room temperature+30ºC-399ºC

Conversion furnace :room temperature+30ºC-399ºC

Thermal conductivity detector: room temperature+30ºC-399ºC

Hydrogen flame detector :room temperature+30ºC-399ºC

Temperature control precision: ±0.1ºC

1.2 Thermal conductivity detector

Sensitivity: minimum detectable concentration of hydrogen≥5μl/L
Noise: ≤0.05mv
Drift: ≤0.15mv/30min

1.3 Hydrogen flame detector
Minimum detectable concentration of hydrocarbon≥5μl/L
Minimum detectable concentration of CO,CO2≥5μl/L
Noise: ≤0.05mv
Drift: ≤0.15mv/30min

1.4 Whole machine start-up time: less than 3 hours

 

 

The analyzer adopts double-pillar parallel shunt system ,equipped with TCD, double FID and methane conversion oven, and could achieve total analysis of nine components(H2,O2,N2,CH4,C2H2,C2H4,C2H6,CO, CO2)of dissolved gas in insulation oil by one time. 

The analyzer can be employed for internal fault detection of power system oil and gas equipment, cooling medium analysis of hydrogen-cooled generators, impurity analysis of sulfur hexafluoride, the boiler flue gas analysis, gas analysis and environmental monitoring analysis. Due to its employment not only for special analysis, but also for general analysis, the analyzer becomes the most effective gas analytical instrument in petroleum, chemical engineering, mining and other systems.

1. Applicable boiling range: petroleum products or distillates of 55~550ºC boiling range distribution such as fuel, kerosene,
diesel, lubricants, wax oil etc. On this chromatographic condition tested sample components can all show the peaks. It adopts area normalization method to fix quantity. It complies to SH/T 0558-2002 and ASTM D2887standard.

2. Applicable boiling range: crude oil of initial boiling point~538ºC boiling range distribution. Get distribution proportion of
fuel, diesel, kerosene, heavy oil. Since the heavy components above 538ºC can not show peak, it adopts incremental internal standard method and complies to ASTM D5307 standard.

3. Applicable boiling range: petroleum products or distillates of 55~680ºC boiling range distribution. On this chromatographic condition tested sample components can all show the peaks. It adopts area normalization method to fix quantity.

Characteristic 

1 Computer-keyboard operation
This realizes five heating zone temperature control, detector control, over-temperature protection, "zero" degree protection, air break protection and other functions, so as to protect the chromatographic column and thermal conductivity rhenium tungsten filament most effectively.

2 Large-screen liquid crystal display It could display a large amount of information intuitively and clearly.

3 Advanced chromatography process
Based on only one injection and three-detectors analytical process, the analyzer greatly increases detection sensitivity of
hydrocarbon gas. Double hydrogen flame setting also reduces the detection impact caused by the gas content differences.

 

Related Products

 

1.Fully Automatic Karl Fischer Water Content Tester TP-2100
2.Kinematic Viscosity Tester VST-2000
3. Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
4. Fully Automatic Surface/Interface Tension Tester IT-800
5. Fully Automatic Open Cup Flash Point Tester TPO-3000
6.Fully Automatic Closed Cup Flash Point Tester TPC-3000
7.Cloud Point & Pour Point Tester PT-2000
8.Multi-functional Vibration Tester VBT-2000
9.Petroleum Products Density Tester DST-3000
10.Distillation Range Tester DIL-201
11.Liquid Phase Corrosion Tester TPS-05
12.Copper Corrosion Tester TP-113
13.Petroleum And Synthetic Liquid Anti-Emulsification Tester TP-122
14.Dew Point Tester DPME-P
15.Vehicle Gear Oil Channel Point Tester Model TP-0030
16.Anti-Corrosive Oil/Grease Salt Spray Corrosion Tester Model TP-0081
17. Mechanical Impurities Tester Model PC-511
18. Air Release Value Tester Model TP-0308
19.Distillate Fuel Oil Oxidation Stability Tester Model TP-175
20. Foam Characteristics Tester Model FC-892
21.Dark Petroleum Products Sulfur Content Tester Model TPC-120
 

22. Petroleum Products Aniline Point Tester Model TP-262A
23.Petroleum Products Ash Tester Model TP-508

24.Petroleum Products Chroma Tester Model TP-225
25. Automatic Petroleum Products Carbon Residue Tester (Micromethod) CS-0625
26.Spontaneous Ignition Point Tester FP-706
27.Fully Automatic Glassware Washing Machine TP504
28. Lube Oil/Grease Evaporation Loss Tester EL-7325
29. Crude Oil And Fuel Oil Sediment Tester TP-130
30. Wide Temperature Range Lubricating Grease Drop Point Tester TLS-22
31. Crude Oil And Petroleum Products Salt Content Tester SCA-068
32. Petroleum Products Saturated Vapor Pressure Tester(Reid Method) TP-8017
33.Petroleum Products Freezing Point Tester TP-2430
34. Oxygen Bomb Calorimeter TP-1B
35. Existent Gum Tester TP-509A
36.Octane and Hexadecane Value Tester TP-131
37.Automatic Gasoline Oxidation Stability Tester TP-148
38. Light Petroleum Products Sulfur Content Tester (Lamp-Kindled Method) TP-119
39. Resistant oil Chlorine Content Tester TP388
40. Distillate Fuel Mercaptan Sulfur Tester TP-624

 

MOQ	1 Set
Trade Terms	EXW, FOB, CIF, CFR
Payment Terms	T/T, L/C
Port of Loading	Any Port of China
Packing Method	Internaional Standard Wooden Case
Transportation Method	By Sea, By Land, By Air, By Express
Supply Capability	100 Sets/Month

 

* The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.
* We guarantee the maintenance time no more than 3 working days and response time within 1 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.
 

Chongqing TOP Oil Purifier Co., Ltd

Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Chongqing TOP is a professional leading manufacturer and supplier of oil purifiers and various related testers. Our company consists of departments respectively for technological development, machinery manufacture, instrument manufacture and quality control etc.