| Certification: | CE |
|---|---|
| Voltage: | 380V |
| Folw Rate: | 50 L/min |
| Structure: | Mobile |
| Mechanical Principle: | Vacuum |
| Type: | Suction Filter |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Attributes:
Capacity ranges from: 1800 LPH to 30000 LPH
Inlet Stainless Steel Filter is easy to clean and used to catch hold coarse dirt
Standard efficiency of 0.5 / 1 Micron after fine filter
Heat exchange through very low specific power electric heaters
To improve the vacuum pumping speed, vacuum pump set in combination with rotary vane vacuum pump and roots pump are provided
Easy to operate
Compact equipment is also provided with pneumatic wheels for easy transport on road
Duplex 3D stereo-evaporation technology, eliminating the liquid water very effectively
Distinctive removing impurities technology filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power
UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effect
Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after treatment
adopts the double-infrared liquid automatic controller, sensitive automatic pressure protector and the high effective equipment for degas, so it is easy to operate
Optional Features:
An exhaust condenser to measure the extracted water
Condenser is equipped to settle the most volatile oil fractions which might distil back to the column
Digital temperature measurement
Digital precision vacuum gauge
Digital flow meter
Digital in line moisture content meter
Ionic reaction columns to remove the acidity from the oil
Audio / Visual fault annunciation System
PLC control system
Mobile Trailers can be provided
Fully-enclosed and Semi-enclosed for weather-proof are available
Technical Parameter:
| Parameter | Unit | ZYD-I-30 | ZYD-I-50 | ZYD-I-100 | ZYD-I-150 | ZYD-I-200 | ZYD-I-250 | ZYD-I-300 | |
| Flow rate | L/h | 1800 | 3000 | 6000 | 9000 | 12000 | 15000 | 18000 | |
| Working vacuum | MPa | -0.08~-0.099 | |||||||
| Working pressure | MPa | ≤0.3 | |||||||
| Temperature range | ºC | 20 ~ 80 | |||||||
| Power | 3 ph 380V 50Hz (Or as needed) | ||||||||
| Working noise | dB(A) | 75 | 75 | 75 | 75 | 80 | 80 | 80 | |
| Heating power | kW | 30 | 30 | 45 | 60 | 75 | 90 | 120 | |
| Total power | kW | 35.5 | 37.5 | 52.5 | 71.4 | 86.5 | 102.5 | 135 | |
| Oil Inlet/Outlet | mm | φ25 | φ32 | φ42 | φ50 | φ50 | φ60 | φ60 | |
| Weight | Kg | 600 | 800 | 1050 | 1400 | 1800 | 2000 | 2200 | |
| Overall | Length | mm | 1050 | 1100 | 1200 | 1450 | 1600 | 1800 | 1900 |
| Width | mm | 750 | 800 | 950 | 950 | 1100 | 1200 | 1200 | |
| Height | mm | 1350 | 1400 | 1500 | 1650 | 1800 | 1900 | 1900 | |
| Item | Unit | After treatment |
| Breakdown Voltage | kV | ≥75 |
| Moisture content | PPM | ≤3 |
| Gas content | % | ≤0.1 |
| Impurity size | micron | ≤1 (no free carbon) |
| IFT | dynes/cm | ≥40 |
| Acid value | mg KOH/g | ≤ 0.03 |
| Dielectric loss factors | tgδ(90ºC) | ≤0.001 |
Technical Parameter:
| Parameter | Unit | ZYD-I-30 | ZYD-I-50 | ZYD-I-100 | ZYD-I-150 | ZYD-I-200 | ZYD-I-250 | ZYD-I-300 | |
| Flow rate | L/h | 1800 | 3000 | 6000 | 9000 | 12000 | 15000 | 18000 | |
| Working vacuum | MPa | -0.08~-0.099 | |||||||
| Working pressure | MPa | ≤0.3 | |||||||
| Temperature range | ºC | 20 ~ 80 | |||||||
| Power | 3 ph 380V 50Hz (Or as needed) | ||||||||
| Working noise | dB(A) | 75 | 75 | 75 | 75 | 80 | 80 | 80 | |
| Heating power | kW | 30 | 30 | 45 | 60 | 75 | 90 | 120 | |
| Total power | kW | 35.5 | 37.5 | 52.5 | 71.4 | 86.5 | 102.5 | 135 | |
| Oil Inlet/Outlet | mm | φ25 | φ32 | φ42 | φ50 | φ50 | φ60 | φ60 | |
| Weight | Kg | 600 | 800 | 1050 | 1400 | 1800 | 2000 | 2200 | |
| Overall | Length | mm | 1050 | 1100 | 1200 | 1450 | 1600 | 1800 | 1900 |
| Width | mm | 750 | 800 | 950 | 950 | 1100 | 1200 | 1200 | |
| Height | mm | 1350 | 1400 | 1500 | 1650 | 1800 | 1900 | 1900 | |
| Item | Unit | After treatment |
| Breakdown Voltage | kV | ≥75 |
| Moisture content | PPM | ≤3 |
| Gas content | % | ≤0.1 |
| Impurity size | micron | ≤1 (no free carbon) |
| IFT | dynes/cm | ≥40 |
| Acid value | mg KOH/g | ≤ 0.03 |
| Dielectric loss factors | tgδ(90ºC) | ≤0.001 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}