| Customization: | Available |
|---|---|
| Type: | Universal Testing Machine |
| Display: | LCD |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
1.Temperature Measurement Range: Room Temperature to 400ºC 2.Accuracy: 0.1ºC 3.Resolution: 0.1ºC 4.Heating rate: At the beginning of heating, the heating rate of the sample ranges from 4 (ºC/min)~17(ºC/min).When the sample reaches the last 23ºC±5ºC before the expected flash point,the heating rate ranges from 5(ºC/min)~6(ºC/min). 5.Test ignition source: natural gas, liquefied petroleum gas or butane gas/electronic ignition. 6.Ignition test cycle: 23ºC±5ºC before reaching the expected flash point, it will sweep once when the temperature increase very 2ºC. 7.Flash point value: If the difference between the observed flash point and the initial ignition temperature is less than 18ºC, then the result is invalid. In this condition,new specimens should be replaced and re-determined, and the initial ignition temperature should be adjusted until the effective results are achieved. That means the flash point value should be higher than the initial ignition temperature by more than 18ºC. 8.Repeatability of measurements: Repeatability ≤4ºC Operating environment: (ambient temperature) 5~50ºC. (Relative humidity) less than 80% RH 9.Power supply: AC230V±10%,50±1Hz 10.Power: 500W |
){kind=link}