ASTM D1514 Carbon Black Sieve Residue Tester CRT-60
Product Description
Carbon Black Sieve Residue Tester CRT-60 Complies with ASTM D1514 standards.
This Equipment can test 35mesh (500μm),100mesh (150μm),325mesh (45μm) and other mesh carbon black sieve residue. It also can test 325 mesh (45μm) sieve residue and 100 mesh (150μm) coarse grain of white carbon black(Precipitated hydrated silica). At the same time, it can test other sieve residue in chemical analysis.
It is an indispensable device for carbon black,white carbon black and other powder particle material sieve residue test. Carbon black sieve residue content is is an important index for characterizing the quality of the carbon black (especially new process for carbon black), it has good correlation with the physical and mechanical properties of rubber.Carbon black sieve residue content is directly related to carbon black production technology and technical equipment level. It is very important to the test of Carbon black sieve residue to control the quality of carbon black in production.
After whole set installation and debugging qualified delivery, users only need to connect water pipe and power supply and directly use, which operation is very convenient
Product Parameters
Design pressure: 0.5MPa
Using pressure: 0.1~0.4MPa±0.04MPa
Using temperature: <=7.5ºC
Mesh plate aperture: 325mesh(45μm)along with whole machine delivery
35mesh(500μm)along with whole machine delivery
Others: other mesh filter mesh plate need another order
Applicable medium: water,carbon black,white carbon black(Precipitated hydrated
silica) and other chemical powder material
Power Supply: ~220V 50Hz 300VA
Dimensions: 44×45×48cm
){kind=link}