Mobile Trolley Mounted Transformer Oil Filtration System (ZYD-M-30)

• Certification: BV, SGS, CE
• Application: Transformer Oil
• Voltage: 380V
• Folw Rate: 100 L/min
• Color: Gray
• Transport Package: Wooden Case
• Model NO.: ZYD-M-30
• Specification: CE, SGS
• Trademark: TOP
• Origin: Chongqing, China
• HS Code: 84212990
• Production Capacity: 1000 Sets/Month

Product Description

Mobile trolley mounted transformer oil filtration system with Fail proof Interlocking System
 
Oil Filtration System
Benefits
The importance of good quality power makes it very important that all the equipments give their best performance. Transformers being a key equipment, it becomes imperative to maintain optimal insulation properties of the transformer oils by rigid control over moisture, dissolved gases and particulate contamination. Failing in this results in considerable decrease in its BREAK DOWN VOLTAGE, INSULATION RESISTANCE, and increase in DIELECRIC LOSS FACTOR, leading to breakdowns of transformers. Conditioning saves the cost of using new oil frequently and also increases the life of the transformer. Even commercial new oil is seldom sufficiently pure for direct use in high voltage equipment, being subject to contamination in transport containers and liable to absorb unacceptable contaminants and moisture.
 
Filtration Eliminates
 Solid impurities
 Dissolved water
 Dissolved gases\
 
Technical Parameters:  
 

Parameters		Unit	ZYD-30	ZYD-50	ZYD-100	ZYD-150	ZYD-200	ZYD-250	ZYD-300
Flow Rate		L/h	1800	3000	6000	9000	12000	15000	18000
Working vacuum		MPa	-0.08 ~ -0.099
Working Pressure		MPa	≤0.3
Temperature Range		ºC	20 ~ 80
Power			Three Phase 50Hz,380V (or as needed)
Working Noise		dB(A)	70	70	70	75	75	75	75
Heating Power		KW	28	30	45	60	75	90	120
Total Power		KW	35.5	37.5	52.5	71.4	86.5	102.5	135
Inlet/Outlet		mm	φ25	φ32	φ42	φ50	φ50	φ60	φ60
Weight		Kg	600	800	1050	1400	1800	2000	2200
Overall	Length	mm	1050	1100	1200	1450	1600	1800	1900
	Width	mm	750	800	950	950	1100	1200	1200
	Height	mm	1350	1400	1500	1650	1800	1900	1900

 
Guarantee Value
 

Item	Unit	After treatment
Breakdown Voltage	kV	≥75
Moisture content	PPM	≤3
Gas content	%	≤0.1
Impurity size	micron	≤0.5 (no free carbon)
IFT	dynes/cm	≥40
Acid value	mg KOH/g	≤ 0.03
Dielectric loss factors	tgδ(90ºC)	≤0.001
Colour	L	≤0.5