Customization: | Available |
---|---|
Certification: | CE |
Application: | Transformer Oil |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Application
The oil regeneration system (Series ZYD-I) has been specially designed for on site use to completely regenerate insulating oils in energized or de-energized transformers. The ZYD-I system provides regular oil purification such as degassing, drying and particulate removal but also can remove acidity, sludge, other soluble oil decay products and discoloration. This is accomplished by the use of high vacuum degasification technology and particulate filters combined with our special brand of earth. After treating, the oil can be reused as new. For special application, the system also can be mounted on a leak proof base and can be installed and operated on a trailer.
Regular servicing of transformers with our equipment can substantially improve their lifetime and performance and on top helps to save money.
Features:
1. The plant is delivered ready for operation.
2. Degassing, dehydration, filtering and regeneration process of various kind of insulation oils in electrical transformers and circuit breakers through put in one or several passes
3. There are two vacuum pumps for plant ZYD-I(one is the vacuum pump, other one is the booster roots pump), which can improve the vacuum value highly. Making sure the water-content of the treated oil is less than 3 PPM.
4. All oil treatment plants, type ZYD-I are equipped with an automatic Anti-Foam Control System.
5. The plant is equipped with built-in control and safety devices, which provides for a maximum operating security.
6. Minimised power consumption through optimised degassing (excellent efficiency factor).
7. Standardized filter housing for 5 micron, 20 micron and 80 micron filter cartridges.
8. Automatic supervision of the degree of contamination of the fine filter cartridges
9. ZYD-I can evacuate the vacuum for the electric equipment separately, such as the transformer. Also it can be used to dry the electric equipment and input the oil into the electric equipment under the vacuum state.
10. The machine adopts the double-infrared liquid automatic controller, pressure automatic-protector which can make sure the machine works online for 150 hours continuously without person. So it is a reliable and high automatically machine.
11. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.
12. Functions of live line work on-site, vacuum drying and vacuum oiling
Parameters | Unit | ZYD-I-M-30 | ZYD-I-M-50 | ZYD-I-M-100 | ZYD-I-M-150 | ZYD-I-M-200 | ZYD-I-M-250 | ZYD-I-M-300 | |
Flow Rate | L/min | 30 | 50 | 100 | 150 | 200 | 250 | 300 | |
Flow Rate | L/H | 1800 | 3000 | 6000 | 9000 | 12000 | 15000 | 18000 | |
Working vacuum | MPa | -0.08 ~ -0.099 | |||||||
Working Pressure | MPa | ≤0.3 | |||||||
Temperature Range | ºC | 20 ~ 80 | |||||||
Power | AC380V/50HZ/3Ph 5 wire (can be customized) | ||||||||
Working Noise | dB(A) | 68 | 70 | 70 | 75 | 75 | 75 | 75 | |
Heating Power | kW | 30 | 36 | 48 | 60 | 80 | 108 | 120 | |
Total Power | kW | 36 | 44 | 54 | 70 | 93 | 120 | 135 | |
Inlet/Outlet | mm | φ32 | φ32 | φ42 | Φ42 | Φ48 | Φ60 | Φ76 | |
Weight | kg | 850 | 1000 | 1100 | 1250 | 2200 | 2600 | 3000 | |
Overall without trailer | L | mm | 1700 | 1750 | 1800 | 1900 | 2000 | 2150 | 2200 |
W | mm | 1200 | 1300 | 1400 | 1450 | 1500 | 1550 | 1600 | |
H | mm | 2200 | 2250 | 2450 | 2450 | 2450 | 2450 | 2450 | |
Index after filtering | Breakdown Voltage | kV | ≥75 | ||||||
Moisture content | PPM | ≤3 | |||||||
Gas content | % | ≤0.1 | |||||||
Impurity size | micron | ≤1 (no free carbon) | |||||||
Value β | % | 98 | |||||||
Cleanness | NAS1638 | ≤ 6 | |||||||
Flash Point (Close) | ºC | ≥135 | |||||||
Acid value | mg KOH/g | 0.01 | |||||||
Interfacial tension | N/m | ≥145 | |||||||
Dielectric loss factor | ≤0.01 | ||||||||
Color | Light yellow(close to water) |
Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Chongqing TOP is a professional leading manufacturer and supplier of oil purifiers and various related testers. We consists of departments respectively for technological development, machinery manufacture, instrument manufacture, quality control etc. On basis of mature development and manufacture technology and highly qualified production management team, the products own high quality, easy operation, excellent performance and lone service life.
TOP Oil Purifiers are widespread in the fields of electric power, petrifaction, mineral, shipbuilding, steel construction, bridge, automobile and railway, playing a great role in reducing energy consumption for clients as well as environmental pollution. We provides you with reliable oil purifiers such as transformer oil purifier, turbine oil purification machine, hydraulic oil treatment machine, lubricating oil filtration machine, fuel oil restoration, oil and water separator, oil regeneration equipment, waste oil recycling equipment , black oil discoloration plant etc.