Lwt-3 Pull-Rod Lubricant Oil Anti-Abrasion Tester/Lubricity Anti Wear Analyzer/Oil Friction Wear Meter

• Customization: Available
• Transport Package: Standard Wooden Case
• Specification: 440*300*220mm
• Model NO.: LWT-3
• Origin: Chongqing
• HS Code: 84212990

Product Description

Product Description

 

LWT-3 Pull-rod Lubricant Oil Anti-abrasion Tester/Lubricity Anti Wear Analyzer/Oil Friction Wear Meter

Application

It can be used to assess lubricant, metal, plastic, coating, rubber, ceramics and other materials friction and wear. Not only can satisfy traditional petrochemical industry user research, development, testing a variety of highgrade series of hydraulic oil,engine oil, gear oil demand, can also satisfy the new materials, new technology research development of user simulation evaluation test demand.

Features:

The anti-abrasion tester is suitable for comparing the extreme pressure performance of lubricating oil mixed with anti-abrasion
agent.

1) First turn on the 220V power supply (110V power supply needs description), press power switch to run the motor, use the random oilstone strip to thoroughly polish and wipe the grinding wheel with lubricating oil, then turn off the power. Place the cylindrical grinding block in the short lever groove of the tester and fix it.

2) Select a kind of lubricating oil to be put into the oil tank (suitable to inflate the grinding wheel 3-5 mm), and install the
oil tank and long lever on the machine (as pictures)

3) Start the motor, first run it, then add the weight load block one by one at the end of the long lever at intervals of time (2-5 seconds), record the number of weights, and turn off the power quickly until the grinding wheel stops, take down the whole stack.Remove the short lever and observe the abrasion scar depth, area, and roughness of the cylindrical grinding block.

4) The better the anti-abrasion performance, the more number of weights are added,the smaller the abrasion scar area of cylinder module and ellipse, the higher the fineness of abrasion scar. According to this, it can be compared with other test oil samples comprehensively, and the general contrast effect is bright.

5) If testing the mixture of anti-abrasion additive and lubricating oil, the anti- abrasion additive shall be injected into the
oil box according to a certain proportion, mixed with the original lubricating oil, stirred evenly, installed in the oil box, and
the above experiment process shall be repeated.

6) Equipped with portable special case, all accessories have specific locations, after use, placed according to location. Easy to carry, easy to promote excellent lubricant products 

Related products
1. Water Content Tester TP-2100                             2. Digital Karl Fischer Water Content Tester TP-6A  
3. Kinematic Viscosity Tester VST-2000                   4. Kinematic Viscosity Tester TPV-8
5. Kinematic Viscosity Tester VST-3000                   6. Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
7. Automatic Surface/Interface Tension Tester IT-800
8. Automatic Open Cup Flash Point Tester TPO-3000
9.Closed Cup Flash Point Tester TPC-3000
10.Digital Open Cup Flash Point Tester TPO-10
11.Digital Closed Cup Flash Point Tester TPC-100
12.Cloud Point & Pour Point Tester PT-2000
13.Multi-functional Vibration Tester VBT-2000
14.Automatic Potentiometric Titrator TP668
15.Petroleum Products Density Tester DST-3000
16.Karl Fischer Volumetric Water Content Titrator TPD
17.Distillation Range Tester DIL-201
18.Online Oil Quality Tester PTT-002
19.Copper Corrosion Tester TP-113
20.Dew Point Tester DPME-P

Packing & Delivery

 

 

MOQ	1 Set
Trade Terms	EXW, FOB, CIF, CFR
Payment Terms	T/T, L/C
Port of Loading	Any Port of China
Packing Method	Internaional Standard Wooden Case
Transportation Method	By Sea, By Land, By Air, By Express
Supply Capability	100 Sets/Month

 

 

 

Pre-sale service:

Professional pre-sale model/configuration selection advise and technical support -- offered by experienced technician.
Free on-site installation, debugging and technical training -- offered by strictly trained technology application engineers.
We build instrument service profile for our clients to record the product service and maintenance conditions.

After-sale service:

The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.
We guarantee the maintenance time no more than 3 working days and response time within 1 hour.
After instruments start service, we will pay follow-ups to collect the service conditions.