Fully Atomatic Transformer Oil Filtration and Regeneration Equipment ZYB-A
Application
Series ZYB-A adopts Programmable Logic Controller (P.L.C) to achieve the automation of whole treatment process. This machine is mainly used for regenerating the electrical insulating oil such as transformer oil, switch oil and mutual inductor oil, especially suitable for the regeneration of seriously deteriorated insulating oil.
Features
1.Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating impurities, this machine can regenerate the seriously deteriorated oil by removing the polarity materials such as the deep oxides, free carbon in the oil effectively. It can recover the seriously deteriorated oil to comprehensive index of anti-alkali and water-solubility etc.
2.Three ways of service: use only vacuum dewatering, degassing, removing impurities system; use only the regeneration system independently; and also can use both at the same time.
3.Programmable Logic Controller (P.L.C)
Advantages
It can not only removing the water, gas and impurities which mixed in the oil, but also can improve many values reach to the national standard such as the acid value, PH value. Meanwhile, it improves the voltagewithstand value through filtering the polarity materials like free carbon, deep oxides and so on.
Technical Parameters
Parameter |
Unit |
ZYB-A-20 |
ZYB-A -30 |
ZYB-A-50 |
ZYB-A -100 |
ZYB-A-150 |
ZYB-A-200 |
Flow rate |
L/min |
20 |
30 |
50 |
100 |
150 |
200 |
Flow Rate |
L/H |
1200 |
1800 |
3000 |
6000 |
9000 |
12000 |
Vacuum degree |
Mpa |
-0.06~-0.095 |
Vacuum pressure |
Mpa |
≤ 0.3 |
Temperature range |
ºC |
10~ 80 |
Normal working hour |
H |
≥ 4000 |
Continuous working hour |
H |
150 |
working noise |
dB(A) |
≤60 |
≤70 |
≤72 |
≤75 |
≤80 |
≤80 |
Heating power |
kW |
18 |
24 |
30 |
45 |
60 |
72 |
Total power |
kW |
22 |
28 |
35 |
50 |
68 |
80 |
inlet(outlet) caliber |
mm |
Ø25 |
Ø25 |
Ø32 |
Ø42 |
Ø50 |
Ø50 |
Weight |
kg |
400 |
450 |
600 |
800 |
850 |
900 |
Size |
L |
mm |
1500 |
1600 |
1600 |
1600 |
1600 |
1700 |
W |
mm |
900 |
900 |
900 |
950 |
950 |
1000 |
H |
mm |
1550 |
1650 |
1700 |
1700 |
1800 |
1900 |
Index after filtering |
Breakdown voltage |
kV |
≥70 |
Moisture content |
PPM |
≤5 |
Gas content |
% |
0.1 |
Impurity size |
μm |
≤1(customizable) |
Value β |
% |
96 |
Acid value |
mgKOH/g |
≤0.03 |
Dielectric loss factor. |
tgδ(90ºC) |
≤0.001 |
Guarantee value
Breakdown voltage |
kV |
≥70 |
Moisture content |
PPM |
≤5 |
Gas content |
% |
0.1 |
Impurity size |
μm |
≤1(customizable) |
Value β |
% |
96 |
Acid value |
mgKOH/g |
≤0.03 |
Dielectric loss factor. |
tgδ(90ºC) |
≤0.001 |
Detailed Image
Compoments in Details
Enclosed Type Available(Optional)
Working Process
1.When the oil machine is processing, under the difference of in-out oil pressure,
the oil entry into the pre-filter. And then the larger impurities is filtered.
2.The remaining oil goes into heater to exchange heater.
After heating, the oil in the low vacuum separator forms fog and then membrane which extend the contact area more than hundreds of times.
Under the high temperature, high vacuum, high pumping speed condition, the water in oil rapidly evaporates and pumps out.
3.The oil after dewatered and degassed pulls into secondary filer through the oil drain pump to separate the impurities.
4.By the working of pressure, the oil goes into fine filter.
The fine filter is made of composite microporous material which can effectively remove superfine particles in the oil.
5.The oil out flowed by outlet is the cleaned oil.
6.From so far, the whole purification process is completed.
About Us
Main Oil Purifiers
1.ZY series vacuum transformer oil purifier
2.ZYA series vacuum automatic transformer oil purifier
3.ZYB series vacuum transformer oil regeneration purifier
4.ZYD series double-stage vacuum transformer oil purifier
5.ZYD-I series ouble-stage transformer oil regeneration purifier
6.ZYD-M series trailer-mounted transformer oil purifier
7.TY series vacuum turbine oil purifier
8.TYA series vacuum lubricating oil purifier
9.TYB series coalescence-separation oil purifier
10.TYC series vacuum lubricating oil regeneration purifier
11.CYA series centrifugal oil purifier
12.TPR series waste engine oil recycling system
13.PL series plate and frame oil filter press
14.JL series portable oil purifier
15.BZ series transformer oil regeneration device
Trustable Technical and After-sale Service
Safe and Timely Transportation
*Standard export wooden case with high quality cushioning material ensures that the customers get the item in good condition.
*Carefully check every packing detail before delivery to avoid any troubles during the transportation.
*Appointed logistics company could be used according to customers demands.
* Do our best to make sure customers can get their goods in time.