Product Description
Insulation Oil Regeneration Plant with High Vacuum Degasification Technology and Particulate Filters
Application:
ZYD-I-A transformer oil regeneration system machine adopts Programmable Logic Controller (P.L.C) to achieve the automation of whole treatment process. It is specially designed for on-site use to completely regenerate insulating oils in energized or de-energized transformers. It not only provides regular oil purification including degassing, drying and particulate removal but also removes acidity, sludge, other soluble oil decay products, and improves color. For special application, the system can also be installed and operated on a trailer with a leak proof base.
Features:
1. The plant is delivered ready for operation.
2. Fully automatic operation controlled by Siemens PLC
3. It provides regular oil purification but also removes acidity, sludge, other soluble oil decay products and discoloration.
4. Degasification, dehydration and filtration processes to purify various kinds of insulation oils in electrical transformers and circuit breakers through one or several passes.
5. There are two vacuum pumps for plant ZYD-I-A (one is the vacuum pump, and the other one is the roots pump), which can improve the vacuum value highly, ensuring the water-content of the treated oil is less than 3 PPM.
6. All oil treatment plants, including series ZYD-I-A, are equipped with an automatic Anti-Foam Control System.
7. The plant is equipped with built-in control and safety devices, which provide maximum operating security.
8. Minimized power consumption through optimized degasification (an excellent efficiency factor).
9. Standardized filter housing for 5 micron, 20 micron and 80 micron filter cartridges.
10. Automatic supervision of the degree of contamination of the fine filter cartridges
11. ZYD-I-A can evacuate the electric equipment separately, such as the transformer. Also it can be used to dry the electric equipment and input the oil into the electric equipment under the vacuum state.
12.Reliable and automatic, The machine adopts the double-infrared liquid automatic controller, pressure automatic-protector which can make sure the machine works online for 150 hours continuously without person.
13. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor so as to avoid heating with no liquids, pumping with no liquids, oil leakage and electricity leakage. If there is any fault, machine will be power off automatically.
14. Functions of vacuum drying and vacuum oiling, as well as live-line working on site.
Product Parameters
| Parameters |
Unit |
ZYD-I-A
-30 |
ZYD-I-A
-50 |
ZYD-I-A
-100 |
ZYD-I-A
-150 |
ZYD-I-A
-200 |
ZYD-I-A
-250 |
ZYD-I-A
-300 |
| Flow Rate |
L/min |
30 |
50 |
100 |
150 |
200 |
250 |
300 |
| Flow Rate |
L/H |
1800 |
3000 |
6000 |
9000 |
12000 |
15000 |
18000 |
| Working vacuum |
MPa |
-0.08 ~ -0.099 |
| Working Pressure |
MPa |
≤0.3 |
| Temperature Range |
ºC |
20 ~ 80 |
| Power |
|
AC380V/50HZ/3Ph 5 wire (can be customized) |
| Working Noise |
dB(A) |
68 |
70 |
70 |
75 |
75 |
75 |
75 |
| Heating Power |
kW |
30 |
36 |
48 |
60 |
80 |
108 |
120 |
| Total Power |
kW |
36 |
44 |
54 |
70 |
93 |
120 |
135 |
| Inlet/Outlet |
mm |
φ32 |
φ32 |
φ42 |
Φ42 |
Φ48 |
Φ60 |
Φ76 |
| Weight |
kg |
850 |
1000 |
1100 |
1250 |
2200 |
2600 |
3000 |
| Overall |
L |
mm |
1700 |
1750 |
1800 |
1900 |
2000 |
2150 |
2200 |
| W |
mm |
1200 |
1300 |
1400 |
1450 |
1500 |
1550 |
1600 |
| H |
mm |
2200 |
2250 |
2450 |
2450 |
2450 |
2450 |
2450 |
| Index after filtering |
Breakdown Voltage |
kV |
≥75 |
| Moisture content |
PPM |
≤3 |
| Gas content |
% |
≤0.1 |
| Impurity size |
micron |
≤1 (no free carbon) |
| Value β |
% |
98 |
| Cleanness |
NAS1638 |
≤ 6 |
| Flash Point (Close) |
ºC |
≥135 |
| Acid value |
mg KOH/g |
0.01 |
| Interfacial tension |
N/m |
≥145 |
| Dielectric loss factor |
|
≤0.01 |
| Color |
|
Light yellow(close to water) |
Company Profile
Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Chongqing TOP is a professional leading manufacturer and supplier of oil purifiers and various related testers. We consists of departments respectively for technological development, machinery manufacture, instrument manufacture, quality control etc. On basis of mature development and manufacture technology and highly qualified production management team, the products own high quality, easy operation, excellent performance and lone service life.
TOP Oil Purifiers are widespread in the fields of electric power, petrifaction, mineral, shipbuilding, steel construction, bridge, automobile and railway, playing a great role in reducing energy consumption for clients as well as environmental pollution. We provides you with reliable oil purifiers such as transformer oil purifier, turbine oil purification machine, hydraulic oil treatment machine, lubricating oil filtration machine, fuel oil restoration, oil and water separator, oil regeneration equipment, waste oil recycling equipment , black oil discoloration plant etc.
Related devices
){kind=link}