Application:
Series TPEE are specially designed for the measurement of water content in oil. Series TPEE is ideal for online monitoring of moisture in lubrication or insulation oil, which is very important for the long-term performance and adaptive maintenance of plant and machinery. For instance, moisture affects dramatically the insulation characteristics of electrical transformer oil and therefore continuous monitoring is extremely important.
Humidity measurement in oil:
Similar to the humidity in the air, the water content in an oil can be described by the absolute value in ppm or by the relative value aw: - ppm (mass of water / mass of oil) - aw (actual water content as fraction of the water content in the saturated oil) aw = 0 corresponds to water-free oil, while aw = 1 describes fully saturated oil. Aw measurement with TPEE transmitter series is based on the outstanding long term stability and resistance to pollution of the TPEE capacitive sensor elements series HC.
Product Versions:
The physical quantities measured are water activity aw and temperature T. With these quantities TPEE calculates the water content(ppm) in mineral transformer oils. Calculation of water content in non-mineral transformer oils and lubrication oils can be accomplished by downloading specific parameters of the oil.
Technical Parameters:
Measuring range |
0...1 aw, -40...180°C |
Output |
0-5V, 0-10V, 4-20mA, 0-20mA |
Acurracy |
+/- 0.01aw; +/- 0.2°C |
Power supply |
24V AC/DC |
Our oil filtration machine:
Series ZY Single-Stage Vacuum Transformer Oil Purifier
Series ZYD Double High Vacuum Transformer Oil Purifier
Series ZYB Multiply-Function insulating oil treatment machine
Series TY Turbine Oil Purification Apparatus
Series TYA Lubricating oil/ hydraulic oil purification unit
Series TYB Portable light Fuel oil purification machine
Series TYD Vacuum dehydrator
Series TYF Phosphate ester fire-resistance oil purifier
Series PL Plate pressure oil purifier
Series TYD Vacuum dehydrator
Series EFD Explosion protection filtration machine
Series BAM Press filtration system
Series ZKCC Vacuum pumping device
Series COP Cooking oil purification machine
Series CYS Centrifugal oil purification machine
Series JL Portable oil filtering and oiling machine
Series EOR series waste engine oil recycling system
Test equipment
1. Transformer oil Breakdown voltage Tester ( BDV test kit) series IIJ-II
2. Acidity tester model ACD-3000I
3. Karl Fischer Water content Tester Model TP-6A / model TP-2100
4. Fully automatic Interfacial Tension Analyzer model IT-800
5. Gas-Chromatography transformer oil gas analyzer model DGA2013-1
6. Kinematic Viscosity tester model VST-8 /model VST-2000
7. Flash point tester (open cup) model TPO-3000
8. Flash point tester (close cup) model TPC-3000
9. TAN-DELTA TESTER, 10kV Capacitance and Dissipation Factor Test Set model CDEF
10. CT/PT tester model TPVA-404
11. Transformer turn ratio tester model HYG-II
12. Relaying Protection Tester model TPJB-III
Transformer oil testing machine, transformer oil dielectric strength tester, used motor oil recycling machines, oil purifier equipment, oil purifier equipment, transformer oil test equipment, fuel oil purifier, transformer oil gas analysis, transformer turn ratio, oil analysis equipment, oil analysis equipment, transformer oil dielectric strength tester, supplier of cooking oil reuse machine, regeneration machine, dielectric strength meter, ce tester device, oil filtering machine, mobile transformer oil regeneration plant, transformer ratio tester, biodiesel oil pretreatment, oil distillation plant, transformer oil gas chromatography, excellent transformer oil cleaning regeneration, fuel purification plant, oil cleaner, ship waste oil recycle, oil test kit, transformer oil testing kit, recycling oil in engine oil, transformer oil bdv testing result, press filter, waste oil regeneration, transformer test set, transformer test set,
Measuring range |
0...1 aw, -40...180°C |
Output |
0-5V, 0-10V, 4-20mA, 0-20mA |
Acurracy |
+/- 0.01aw; +/- 0.2°C |
Power supply |
24V AC/DC
|