Tp-103 Automatic Pour Point Tester

• After-sales Service: 1 Year
• Warranty: 1 Year
• Transport Package: International Standard Export Case
• Trademark: TOP TESTER
• Origin: Chongqing
• Model NO.: TP-103
• HS Code: 9031809090
• Production Capacity: 100 Sets/Month

Product Description

TP-103 Automatic Pour Point Tester

Introduction:

1. The TP-103 automatic pour point tester is designed and manufactured according to GB/T 3535 and ASTM D97 standards, and is suitable for determining the pour point of petroleum products.
2. The environmental conditions for using the instrument are: ambient temperature 10~35ºC, humidity ≤85%, working power supply AC220V±10%, 50Hz.
 

Features:

1. Embedded computer, imported industrial computer, 12.1-inch large-screen LCD display, full Chinese operating system, touch screen control.
2. The metal bath is equipped with imported compressors and double-compressor compound refrigeration, which can cool down quickly.
3. Double bath, double hole, bath temperature is controlled separately, and two sets of data can be detected at the same time.
4. The sample completes the measurement of all temperature points in one bath.
5. Controlled by a single-chip microcomputer, it can automatically complete the process of sample lifting, tilting, and detection.
6. With fast detection function. Quick method: The lowest cold bath temperature can be directly set according to the expected pour point to quickly cool the sample and shorten the experiment time.
7. The process of automatic timing, automatic judgment of test results, automatic storage of test results, and result printing.
8. Using PPT imaging technology, visually observe the changes in the oil surface.
9. The failures that occur during the experiment of the instrument can be displayed through the status bar on the main interface, which is convenient for maintenance.
10. The imported glass temperature sensor is adopted, and the thermal conductivity is consistent with that of the mercury glass thermometer, and the result is more accurate.
11. The instrument can be connected to the laboratory LIMS system and multiple machines can be networked.
 

Technical Parameters:

The lowest measured pour point: -56ºC
Temperature control range: -69ºC~+48ºC
Bath temperature control accuracy: ±0.5ºC
Cooling speed: from 48ºC to -70ºC≤15 minutes
The bath temperature drops by 17ºC≤150 seconds every time
Interval between shutdowns: >30min
Number of test holes: 2 holes
Work rate: 1800W
Overall dimensions: 700×550×640mm