| Certification: | CE, ISO |
|---|---|
| Application: | Transformer Oil |
| Voltage: | 380V |
| Folw Rate: | 200 L/min |
| Structure: | Vacuum |
| Heating Power: | 75kw |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Aging Insulation Oil Switch Oil Transformer Oil Treatment Machine (ZYD-I-200)
Dielectric Oil Regeneration Equipmet
1.Powerful Vacuum design
2.Dual water, gas, acid and particulate removal
3. low cost
Application
The Oil regeneration system (Series ZYD-I) has been specially designed for on site use to completely regenerate insulating oils in energized or de-energized transformers. The ZYD-I system provides regular oil purification such as degassing, drying and particulate removal but also can remove acidity, sludge, other soluble oil decay products and discoloration. This is accomplished by the use of high vacuum degasification technology and particulate filters combined with our special brand of earth. After treating, the oil can be reused as new. For special application, the system also can be mounted on a leak proof base and can be installed and operated on a trailer.
Features
1. Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating particles, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid-alkali water-solubility.
2. For special application, the operation can be controlled by P.L.C (Programmable Logic Controller).
3. Unique vacuum dehydration, degassifier, regeneration system, adopt stereo-evaporation technology, high efficiently remove water, gas, particles from transformer oil, improve oil quality and dielectric strength.
4. Duplex 3D stereo-evaporation, eliminating the liquid water quickly
5. UK g technology by which the trace water that is show chain, such as dissolved water, can be removed effectively.
6. Instinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power
7. Advanced infrared liquid-level automatic control system to accomplish fully automatic control.
8. Specially applied to vacuum oiling and drying for power transmission equipments.
9. The oil of any grades can be treated either on- or off-load.
10. Special oil pump design with lower noise.
11. Special additives for depolarization, can recover oil color of aged transformer oil to new, equipped with flexible unloading device of short time, good efficiency small quality. Discolor under vacuum can save cost of treatment, the waste impurities doesn't pollute environment (it can be used to architecture and road pave)
Oil Technical Data After Treatment:
1. Gas content less than 0.1%
2. Impurity size less than 1μm without free carbon
3. Oil dielectric strength (breakdown voltage) more than 75KV
4. Acidity value less than 0.01 mgKOH/g
5. Dielectric loss factors at 90°C less than 0.001
| Parameters | Unit | ZYD-I-30 | ZYD-I-50 | ZYD-I-100 | ZYD-I-150 | ZYD-I-200 | ZYD-I-250 | ZYD-I-300 | |
| Flow Rate | L/h | 1800 | 3000 | 6000 | 9000 | 12000 | 15000 | 18000 | |
| Working vacuum | MPa | -0.08 ~ -0.099 | |||||||
| Working Pressure | MPa | ≤0.3 | |||||||
| Temperature Range | C | 20 ~ 80 | |||||||
| Power | Three Phase 50Hz,380V (or as needed) | ||||||||
| Working Noise | dB ( A ) | 70 | 70 | 70 | 75 | 75 | 75 | 75 | |
| Heating Power | KW | 28 | 30 | 45 | 60 | 75 | 90 | 120 | |
| Total Power | KW | 35.5 | 37.5 | 52.5 | 71.4 | 86.5 | 102.5 | 135 | |
| Inlet/Outlet | mm | φ25 | φ32 | φ42 | φ50 | φ50 | φ60 | φ60 | |
| Weight | Kg | 600 | 800 | 1050 | 1400 | 1800 | 2000 | 2200 | |
| Overall | Length | mm | 1050 | 1100 | 1200 | 1450 | 1600 | 1800 | 1900 |
| Width | mm | 750 | 800 | 950 | 950 | 1100 | 1200 | 1200 | |
| Height | mm | 1350 | 1400 | 1500 | 1650 | 1800 | 1900 | 1900 |
|
| Item | Unit | After treatment |
| Breakdown Voltage | kV | ≥75 |
| Moisture content | PPM | ≤3 |
| Gas content | % | ≤0.1 |
| Impurity size | micron | ≤0.5 (no free carbon) |
| IFT | dynes/cm | ≥40 |
| Acid value | mg KOH/g | ≤ 0.03 |
| Dielectric loss factors | tgδ(90ºC) | ≤0.001 |
| Colour | L | ≤0.5 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}