Waste Industrial Oil Distillation Refinery Unit
|Min. Order (Sets)||FOB Price|
|1+||US $80,000 / Set|
Waste engine oil/motor refining plant
1. Efficiently eliminate water, gas, emulsion and impurity,process waste oil to base oil and diesel
2. ISO&CE quality approved
3. Safe operation
This equipment EOS is applicable for recycling engine oil, gear oil, hydraulic oil, form oil, rail oil, compressor oil,vacuum pump oil, axle oil, slideway oil, bearing oil, turbine oil, cylinder oil, drawing oil, conduction oil,quenching oil, insulation oil and rolling oil in industries of petroleum, chemical, cement, metallurgy, mining, electricity, ship building, machinery, military, rubber, instrumentation, transportation, building materials, paper making etc. It is mainly for the waste engine oil in various automobile repair plants and 4S stores, floating mixed oils and light coal tar oil which are from various industrial and mining enterprises and flow into sewer,schizolytic crude oils of straws and firewood. After distillation classification treatment, the oil is processed to base oil and diesel. It will never reverse color.
1. Gasification reaction still: designed regarding the production scale; equipped inside with material adding
preheating tube; heat source adopts infrared electrical heater or coal etc.
2. Catalytic tower: made regarding production scale; with clapboards inside and downside the tower;with highly
efficient chemical filler upside which is adjusted regarding the season and customer requirement.
3. Cooler: cooling water enters from the bottom and flows out of the top.
4. Oil water separator: adopts the principle that water has bigger density than oil to layered and separately
discharged oil and water.
5. Oil gas separator:recycle the non-condensable gases into furnace to be burned or purified and then
discharged out. It both resolves environment protection problem and saves fuel.
6. Fire arrester: it is actually a liquid phase epitaxy seal which contains water downside. Non-condensable
gases enter into the water and then come out; then the gases are sent through gas pipeline into the furnace
to be burned, which can prevent gases to flow back to avoid fire disaster caused by backfire.
7. Preheating tank: preheat the material by the flue temperature to remove water.
We adopt the technology of different material's molecular motion is different to achieve the separation of substances.Firstly, pre filter the oil by removal of big particulates in oil, and then pumped into distillation tower and heated. During the process, the molecular which is distilled enough energy escape from the molecular level. Between Less than the mean free path of molecules and larger than the light weight of the molecular mean free path, a condenser provided at the surface, so that the light molecules is condensed continuously. In this way, extract the desired component from the waste oil (The process can be carried out at temperatures far below the boiling point, low pressure distillation,not easily oxidized. Lighter molecules escape from the surface , almost without collisions to reach the condensing surface, so the heating time is very short. It is high storage rate of volatile and high heat-sensitive material).
The distilled oil is storage in oil tank. Through dehydration, degasification process to remove the dissolved water and dissolved gas completely. Then the oil is pumped into secondary filter and fine filter to remove tiny particulate.If the out oil has not yet reached the color and transparency as you required , It can be pumped into the reactor through the oil out pump , adding the adsorbent material by physical method to discolor and then through a filter press to separate liquid and solid. Then filtered by secondary and fine filter again. Finally, we get good new oil.
|Working oil temp.||ºC||160-250||160-280||160-300||160-320||160-320||160-320||160-320|
|Heating method||Electrical heating, combustible gas or coal|