Series ZYD transformer oil treatment is suitable for filtering new oil ,imported oil and super HV transformer oil, particularly applicable to 110KV power distribution system and the national grid, shortening the oil treating duration during installation and maintenance of transformer.Series ZYD transformer oil filtration is suitable for filtering new oil ,imported oil and super HV transformer oil, particularly applicable to 110KV power distribution system and the national grid, shortening the oil treating duration during installation and maintenance of transformer.
Transformer Oil Treatment Features
1. Two pumps: Vacuum pump and booster pump
2. Three-stage filter system
3. Z-shape Heater to make the heating uniformity
4. Installing oil-level floating ball and double-infrared liquid level automatic controller to control the oil level
5. Foam sensor to avoid oil leaking
6. Temperature Controller to protect the machine
7. Suitable oil filtration machine for high voltage transformer
8. Large filtration area, high capacity of holding impurities
9. Two vacuum separator to increase separating size and time and ensure the drying degree and improve dielectric strength which is higher than 75 KV.
10. Doing online oil purification of substations over 110 KV.
11. Independent function of vacuum oil filling and drying.
12. Duplex stereo flash evaporation technology
13. Equipped with pressure protective system and interlocked protective system to connect oil pump, heater and liquid level controller. If there has any fault, this oil filter will be power off automatically.
14. Saving energy and time
Transformer Oil Purification's Advantage:
Expectations on an effective oil plant for treatment of insulating oil:
· Low moisture content at plant outlet.
· Low gas/air content at plant outlet.
· Elimination of residual gas from the insulation.
· Drying of transformer insulation.
· Easy and failsafe operation.
· On-line measuring and recording of process parameters.
· Flexibility in application (various oil types and oil volumes)
Transformer Oil Purifier's Technical Data:
Parameters |
Unit |
ZYD-30 |
ZYD-50 |
ZYD-100 |
ZYD-150 |
ZYD-200 |
ZYD-250 |
ZYD-300 |
Flow Rate |
L/H |
1800 |
3000 |
6000 |
9000 |
12000 |
15000 |
18000 |
Working vacuum |
MPa |
-0.08 ~ -0.099 |
Working Pressure |
MPa |
≤0.3 |
Temperature Range |
°C |
20 ~ 80 |
Power |
|
Three Phase 50Hz,380V (or as needed) |
Working Noise |
dB(A) |
70 |
70 |
70 |
75 |
75 |
75 |
75 |
Heating Power |
kW |
28 |
30 |
45 |
60 |
75 |
90 |
120 |
Total Power |
kW |
35.5 |
37.5 |
52.5 |
71.4 |
86.5 |
102.5 |
135 |
Inlet/Outlet |
mm |
φ25 |
φ32 |
φ42 |
φ50 |
φ50 |
φ60 |
φ60 |
Weight |
Kg |
600 |
800 |
1050 |
1400 |
1800 |
2000 |
2200 |
Overall |
L |
mm |
1050 |
1100 |
1200 |
1450 |
1600 |
1800 |
1900 |
W |
mm |
750 |
800 |
950 |
950 |
1100 |
1200 |
1200 |
H |
mm |
1350 |
1400 |
1500 |
1650 |
1800 |
1900 |
1900 |
Table2 Guarantee Value
Item |
Unit |
After treatment |
Breakdown Voltage |
kV |
≥75 |
Moisture content |
PPM |
≤3 |
Gas content |
% |
≤0.01 |
Impurity size |
micron |
≤1 (no free carbon)
|
Benefits of Transformer Oil Treatment
1.The conventional process of transformer oil exchange is time consuming, costly and not environmentally friendly.
2.Our mobile oil purification plants can regenerate the oil on site and in most cases while the transformer is online. This means there will be no production outages for you.
3.It will also be 30 to 60% cheaper to purify the transformer oil compared to exchanging the oil.
4.The process of oil purification not only restores the oil properties, but also cleans the inside of the transformer of all decay products, which would not happen if the oil was merely replaced.
Insulating Oil Testers
1. Fully Automatic Insulating Oil Dielectric Strength Tester IIJ-II
2. Fully Automatic Insulating Oil Dielectric Strength Tester DYT
3. Fully Automatic Insulating Oil Dielectric Strength Tester DYT-2
4. Three Cups Insulating Oil Dielectric Strength Tester IIJ-III
5. Six Cups Insulating Oil Dielectric Strength Tester IJJ-VI
6. Insulating Oil Dielectric Strength Tester IIJ-603
7. Insulating Oil Tan Delta ( Dielectric Loss) Tester DLT0812
8. Insulating Oil Dielectric Loss And Resistivity Tester TP-6100A
9. Fully Automatic Water-Soluble Acid Value Tester PH-C
10. Fully Automatic Surface/Interface Tension Tester IT-800
11. Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
12. Insulating Oil Gassing Property Tester DPT-20
13. Insulating Oil Oxidation Stability Tester TP622
14. Multifunctional Shaker SD-01
15. Insulating Oil Water Content Tester TP-2100
16. Online Insulating Oil Water Content Tester TPEE
17. Transformer Oil Dissolved Gas Chromatograph DGA
· Flexibility in application (various oil types and oil volumes)