GC-2010SD power system dedicated insulation oil and gas chromatograph runs by computer automatic control, all-keyboard operation and large-screen liquid crystal display according to the requirements of power system«dissolved gas component determination in insulation oil (chromatography)» ,and is characterized by high-precision temperature control, stable and reliable performance, high sensitivity, good reproducibility and so on.
The analyzer adopts double-pillar parallel shunt system ,equipped with TCD, double FID and methane conversion oven, and could achieve total analysis of nine components (H2,O2,N2,CH4,C2H2,C2H4,C2H6,CO, CO2)of dissolved gas in insulation oil by one time.
The analyzer can be employed for internal fault detection of power system oil and gas equipment, cooling medium analysis of hydrogen-cooled generators, impurity analysis of sulfur hexafluoride, the boiler flue gas analysis, gas analysis and environmental monitoring analysis. Due to its employment not only for special analysis, but also for general analysis, the analyzer becomes the most effective gas analytical instrument in petroleum, chemical engineering, mining and other systems.
1. Technical parameters
1.1Temperature control
(1)Temperature range
Column chamber: room temperature+15ºC-399ºC
Vaporizing chamber: room temperature+30ºC-399ºC
Conversion furnace :room temperature+30ºC-399ºC
Thermal conductivity detector: room temperature+30ºC-399ºC
Hydrogen flame detector :room temperature+30ºC-399ºC
(2)Temperature control precision: ±0.1ºC
1.2 Thermal conductivity detector
Sensitivity: minimum detectable concentration of hydrogen≥5μl/L
Noise: ≤0.05mv
Drift: ≤0.15mv/30min
1.3 Hydrogen flame detector
Minimum detectable concentration of hydrocarbon≥5μl/L
Minimum detectable concentration of CO,CO2≥5μl/L
noise: ≤0.05mv
Drift: ≤0.15mv/30min
1.4 Whole machine start-up time: less than 3 hours
2. Features
2.1 Computer-keyboard operation
This realizes five heating zone temperature control, detector control, over-temperature protection, "zero" degree protection, air break protection and other functions, so as to protect the chromatographic column and thermal conductivity rhenium tungsten filament most effectively.
2.2 Large-screen liquid crystal display
It could display a large amount of information intuitively and clearly.
2.3 Advanced chromatography process
Based on only one injection and three-detectors analytical process, the analyzer greatly increases detection sensitivity of hydrocarbon gas. Double hydrogen flame setting also reduces the detection impact caused by the gas content differences.
3.Working conditions
3.1 Normal instrument working conditions
Environmental condition:5ºC-35ºC
Relative Humidity:≤80%
Power supply:220V±10% 50Hz±0.5Hz
3KW power provided.
No strong electromagnetic interference, corrosive gas and strong shock in the surroundings.
3.2 Gas source
Air purity: ensure the purity of carrier gas and hydrogen is more than 99.99%, the air to be used is purified and air generator function in dust, oil and water removal.
Output pressure of steel cylinder relief valve: nitrogen 0.35MPa, hydrogen 0.25MPa, air 0.35MPa
Please replace steel cylinder timely when output pressure fell below 2MPa.
3.3 Ground wire
To ensure personal safety and instrument performance, the instrument must be reliably linked to the land. It is suggested to bury the ground wire in the soil 1 meter below.
Price list is included following, contact us for exactly price. thank you
| Item&Configuration |
Qty |
Price
(USD) |
Features/Notes |
GC-2010SD electric power gas chromatography analyzer
|
Main bodyTCD detectordouble FID detectorNi reburnerspecialized analysis column
|
1 set |
|
Large LCD screen; failure diagnosis prompts. Auto ignition. Digital zero setting.
8 stage temperature programming. Intelligent back pullout. 2 packed column injection port. 1 specialized capillary injection port. With gas stop/gas leak/over-temperature protection function. Column adopts particular tracking heating method.
Analysis H2,O2,N2,CH4,C2H2,C2H4,C2H6,CO, CO2 |
| Transformer oil analysis specialized workstation (fully English) |
|
1 |
|
| Oscillator |
|
1 set |
|
| Standard gas specialized for transformer oil analysis |
2L |
1 |
|
| Nitrogen hydrogen air cylinder |
With gases, with cylinder decompressor |
1 for each |
/ |
Can't be transported overseas; only can equip hydrogen generator and air generator; user can buy highly pure nitrogen cylinder in local place |
| Hydrogen generator |
300ml/min |
1 set |
|
Optional. Use instead of hydrogen cylinder. |
| Air generator |
3L/min |
1 set |
|
Optional. Use instead of air cylinder. |
| Computer, laser printer |
Business type; with serial port |
1 for each |
|
|
| Total Price |
|
Note: Specialized transformer oil gas chromatography system contains the above configurations and other items such as sample taking, sample injector and consumables which will be provided along with equipment for free. If you have other question or requirement, please feel free to contact us.
Insulating Oil Testers
Fully Automatic Insulating Oil Dielectric Strength Tester IIJ-IIFully Automatic Insulating Oil Dielectric Strength Tester DYTFully Automatic Insulating Oil Dielectric Strength Tester DYT-2Three Cups Insulating Oil Dielectric Strength Tester IIJ-IIISix Cups Insulating Oil Dielectric Strength Tester IJJ-VIInsulating Oil Dielectric Strength Tester IIJ-603Insulating Oil Tan Delta ( Dielectric Loss) Tester DLT0812Insulating Oil Dielectric Loss And Resistivity Tester TP-6100AFully Automatic Water-Soluble Acid Value Tester PH-CFully Automatic Surface/Interface Tension Tester IT-800 Fully Automatic Oil Acidity Tester (6 cups) ACD-3000IInsulating Oil Gassing Property Tester DPT-20Insulating Oil Oxidation Stability Tester TP622Multifunctional Shaker SD-01Insulating Oil Water Content Tester TP-2100Online Insulating Oil Water Content Tester TPEETransformer Oil Dissolved Gas Chromatograph GC-2010SD
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}