IT-800P Automatic Platinum Plate Method Surface/Interface Tension Tester
Specifications
1. High quality, accuracy and stability
2. Automatic tester
3. Easy to operate
4. High cost performance
Application
The tester, adopting "platinum ring method", tests various liquid interface tension(interface between liquid
and air) and also that between mineral oil and water(interface between liquid and liquid) by means of
automatic control of internal microcomputer under circumstances of nonequilibrium.Testing only requires
pouring liquids into sample cup and then pressing "start" button. Then tester can finish total test and
calculate tension value automatically according to concrete input parameters.
Features
1.Platinum plate method; easy and convenient operation.
2.Automatic digital test to reduce personal operation error.
3.Full scale reset. One button for zero clearing; instant achievement; zero temperature with no drift.
4.Full scale automatic revise: accurate and reliable data with good repeatability.
5.Direct display for the tension value of sample; no need more calculation.
6.Compact structure;working independently with no need of additional equipment like external computer.
7.Can detect surface tension changes caused by different time especially when there is any surfactant or volatile substance.
8.Automatically test middle or high viscosity liquid sample and get balance results.
9.Can test interfacial tension between liquids which don't mixed like that between oil and water.
10.Can completely replace traditional mechanical surface tensiometer.
11.High cost performance.
Technical Parameters
| Testing Method |
Platinum plate method; automatic test |
| Testing Range |
0-600mN/m |
| Sensitivity |
0.1mN/m |
| Accuracy |
±0.1mN/m |
| Repeatability |
±0.1mN/m |
| Display |
Wide viewing angle backlight LCD screen |
| Sample Temperature Range |
0~100ºC(requiring thermostatic bath and cell) |
| Testing Time |
3s~5s for low density sample |
| Container capacity |
At least 15ml |
| Data output |
RS 232C serial or optional USB data interface |
| Power Supply |
AC220V, 1A |
Test equipment
1. Transformer oil Breakdown voltage Tester ( BDV test kit) series IIJ-II
2. Acidity tester model ACD-3000I
3. Karl Fischer Water content Tester Model TP-6A / model TP-2100
4. Fully automatic Interfacial Tension Analyzer model IT-800
5. Gas-Chromatography transformer oil gas analyzer model DGA2013-1
6. Multi-functional Vibration tester model TYD-2000
7. Automatic Freezing Point & Pour Point Tester model PT-2000
8. Kinematic Viscosity tester model VST-8 /model VST-2000
9. Flash point tester (open cup) model TPO-3000
10. Flash point tester (close cup) model TPC-3000
11. TAN-DELTA TESTER, 10kV Capacitance and Dissipation Factor Test Set model CDEF
12. Automatic Freezing Point & Pour Point Tester model TP-501Z
13. Determination of foaming characteristic of lubricating oil model SD-12579
14. Earth resistance tester model HYDW-II
15. Coil Resistance Tester (TPZC-40)
16. CT/PT tester model TPVA-404
17. Transformer turn ratio tester model HYG-II
18. Relaying Protection Tester model TPJB-III
19. Digital Grounding Resistance Tester model TP2571-II
20. DC High Voltage Generator model ZGF
21. Underground water/gold detector model TP-UWD
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}