| Certification: | ISO9001, CE |
|---|---|
| Application: | Lubricant Oil, Transformer Oil, Engine Oil |
| Voltage: | 380V |
| Folw Rate: | 200 L/min |
| Condition: | New |
| After-Sales Service Provided: | Engineers Available to Service Machine Overseas |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier The Oil regeneration system (Series ZYD-I) has been specially designed for on site use to completely regenerate insulating oils in energized or de-energized transformers. The ZYD-I system provides regular oil purification such as degassing, drying and particulate removal but also can remove acidity, sludge, other soluble oil decay products and discoloration.
This is accomplished by the use of high vacuum degasification technology and particulate filters combined with our special brand of earth. After treating, the oil can be reused as new. For special application, the system also can be mounted on a leak proof base and can be installed and operated on a trailer.
Features:
1. Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating particles, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid-alkali water-solubility.
2. For special application, the operation can be controlled by P.L.C (Programmable Logic Controller).
3. Unique vacuum dehydration, degassifier, regeneration system, adopt stereoevaporation technology, high efficiently remove water, gas, particles from transformer oil, improve oil quality and dielectric strength.
4. Duplex 3D stereo-evaporation, eliminating the liquid water quickly
5. UK g technology by which the trace water that is show chain, such as dissolved water, can be removed effectively.
6. Instinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power
7. Advanced infrared liquidlevel automatic control system to accomplish fully automatic control.
8. Specially applied to vacuum oiling and drying for power transmission equipments.
9. The oil of any grades can be treated either on- or off-load.
10. Special oil pump design with lower noise.
11. Special additives for depolarization, can recover oil color of aged transformer oil to new, equipped with flexible unloading device of short time, good efficiency small quality. Discolor under vacuum can save cost of treatment, the waste impurities doesn't pollute environment (it can be used to architecture and road pave)
Advantages:
Comparing with the singlestage vacuum oil purifier, this machine can dewater, degas and removes the impurities more quickly, more completely, and makes the oil BDV (Breakdown Voltage) of 75 kV or higher. As the bridge-type vacuum linking system that can purify and also can be an independent vacuum power supply, this machine can treat the electric insulation devices.
Working Principle:
The insulating oil is conveyed into the degassing tank by means of pressure difference. Oil is indirectly heated by the heater, thus avoiding hot spots and over-swinging of the pre-selected operating temperature. The special degassing system and geometry with several stages in degassing tank creates a large oil surface and a resulting thin film for most effective maximum degassing.
The treatment with a lower end vacuum (-0.08 to -0.095 MPa) guarantees, among others, that no light fractions are evaporated in the insulating oil, whereby the required characteristics of the oil are not changed.
The oil level regulation in the degassing tank assures a continuous oil flow-through in the plant, thus resulting in an optimised degassing of the oil.
After degassing and dehydration under vacuum, the oil is conveyed by means of a specially sealed and frequency controlled pump into regeneration system. Then oil through the fine filterand out of the plant.
Chongqing TOP Oil Purifier Co.,Ltd is a leading professional manufacture of oil purifiers and oil testers from China. We practiced in this line for more than 20 years and has grown to be a full skilled team in tech research, operating, producing with rich experience.We work out oil solution projects aiming at customers' oil problems and needs.
We strongly cared our products are in good function,high efficiency, great cost performance, security,and ecological attention with environmental protection.
Our products help you:
• save oil change cost
• solve oil disposal problem
• keep equipment working more efficiently
• protect machinery and reduce maintenance time
• create a cleaner environment
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}